MERCEDES-BENZ

LI20.10-P-076206

2025-10-13 · NHTSA 11024266

车型关联可作为查阅线索；具体发动机、生产范围和软件条件请核对厂商资料。

厂商摘要

以下为英文原文

Complaint Customer states that the CEL is lit in the instrument cluster. Various codes may be active/stored: Stored in N3/10 in model series 206, 254 or 232: P012800 - The coolant temperature is below the coolant thermostat specified temperature. and/or P01169D - Malfunction in coolant temperature sensor 1. Under temperature in the component or system. For model series 177, 118, 247 in n3/10 (only valid for M139.980 facelift (code 9U8)): P2CEF00 - Electrical fault or open circuit in coolant thermostat. and/or P011685 - Malfunction in coolant temperature sensor 1. There is a signal above the permissible limit. Cause Debris in the coolant system Remedy An updated thermostat must be installed. Order the correct thermostat part number for your application: CLA45/GLA45 with SA Code 9U8: A 139 200 66 02 CLA45/GLA45 WITHOUT SA Code 9U8: A 139 200 27 02 All other M139 equipped vehicles: A 139 200 64 02 New screws must also be ordered and used when installing thermostat A 139 200 66 02 or A 139 200 64 02 PN N000000006341 (qty 2) will be used in place of the existing M8 screws. on the face of the thermostat. The new screws must be torqued to 8 Nm. Follow the instructions in WIS for removal and installation with the exception of the thermostat screw torque value mentioned previously. After replacement, fill and bleed the coolant system per the instructions in WIS for the model that is being worked on. QC the car on a test drive. If the complaint is remedied, release the vehicle.

仅当厂商、通报编号、发布日期和完整摘要一致时，重复登记才会合并展示，原始编号仍予保留。旧资料继续供查阅；确认明确替代关系后才标示后续版本。1994 年以前的车辆关联与默认结果分开显示；未注明年款不等于适用于所有年款。