FREIGHTLINER, MERCEDES-BENZ

LI09_40-N-079144

2026-06-29 · NHTSA 11034408

车型关联可作为查阅线索；具体发动机、生产范围和软件条件请核对厂商资料。

厂商摘要

以下为英文原文

Complaint The check engine light is activated, accompanied by one or more of the following fault codes related to the Boost Pressure Positioner: • P300A6D The boost pressure is too low. Charge Air Cooler. • P300974 Component 'Boost pressure positioner' has a malfunction. The boost pressure is too low. • P300DFB Component 'Boost pressure positioner' has a malfunction. • P300DE8 Boost pressure control A has a malfunction after the cold start. Cause The potential causes for these fault codes are: A. Leak or Blockage in the Intake or Charge Air System: This can prevent the proper flow of air, affecting the boost pressure. B. Insufficient Source Vacuum, Vacuum Leak, or Sticking/Weak Vacuum Component: These issues can prevent the boost pressure positioner from functioning correctly. • For Model Year 2023-Cuurent vehicles operating at approximately 4,000 ft elevation or above, reduced ambient pressure and/or high brake demand may contribute to reduced available vacuum differential and under boost com-plaints, even when no discrete vacuum component failure is identified. C. Internal Malfunction of the Boost Pressure Positioner: The component itself may be faulty. D. Internal Defect with the Variable Turbine Geometry (VTG) System inside the Turbocharger: Issues within the turbo-charger can affect boost pressure control. Remedy Engineering Review Required: For vehicles operating at approximately 4,000 ft elevation or above, a TIPS case MUST be opened before replacing any component for fault codes P300A6D, P300974, P300DFB, or P300DE8.

仅当厂商、通报编号、发布日期和完整摘要一致时，重复登记才会合并展示，原始编号仍予保留。旧资料继续供查阅；确认明确替代关系后才标示后续版本。1994 年以前的车辆关联与默认结果分开显示；未注明年款不等于适用于所有年款。