C0051 · 厂商技术资料

FORD · 2020-02-21

Some 2018-2019 F-150 vehicles built at Dearborn Truck Plant on 17-Jul-2017 and through 4-Aug-2019 or Kansas City Assembly Plant on 14-Aug-2017 and through 6-Aug-2019 equipped with a 3.5L EcoBoost engine, 3675 mm (145 in) wheelbase, XL/STX trim package, and max trailer tow package (towing pack 1) may exhibit a stability control, traction control and/or Advance TracÃÂ1 warning message in the instrument panel cluster (IPC) message center with diagnostic trouble code (DTC) C0051:54 and/or C0051:64 stored in the anti-lock braking system (ABS) module. This maybe due to one or more software parameters in the ABS module. To correct the condition, follow the Service Procedure steps to reprogram the ABS module.

FORD · 2019-12-23

Some 2018-2019 F-150 vehicles built at Dearborn Truck Plant on 17-Jul-2017 and through 26-Jul-2019 or Kansas City Assembly Plant on 14-Aug-2017 and through 28-Jul-2019 equipped with a 3.5L EcoBoost engine, 3675 mm (145 in) wheelbase, XL/STX trim package, and max trailer tow package (towing pack 1) may exhibit a stability control, traction control and/or Advance TracÃ1 warning message in the instrument panel cluster (IPC) message center with diagnostic trouble code (DTC) C0051:54 and/or C0051:64 stored in the anti-lock braking system (ABS) module. This maybe due to one or more software parameters in the ABS module. To correct the condition, follow the Service Procedure steps to reprogram the ABS module.

MAZDA · 2019-06-27

Some vehicles may experience the TCS/DSC indicator light and the TPMS warning light both ON with DTC C0051:62 stored in memory. DTC C0051:62 - The difference between the initial learned value of the steering angle (as calculated by each sensor) and the steering angle (as calculated by the steering angle sensor) while driving in a straight line, has exceeded its allowable tolerance (or threshold). NOTE: For vehicles equipped with the Smart City Brake System (SCBS), the master warning light also comes ON with the message "SCBS Inspection Required" in the display. The symptoms may occur when the following conditions are met: After starting the engine, the vehicle is driven backwards while the steering wheel is turned to the left or to the right or going forward over a bump while turning the…

MAZDA · 2019-04-25

Some vehicles may experience the TCS/DSC indicator light and the TPMS warning light both ON with DTC C0051:62 stored in memory. DTC C0051:62 - The difference between the initial learned value of the steering angle (as calculated by each sensor) and the steering angle (as calculated by the steering angle sensor) while driving in a straight line, has exceeded its allowable tolerance (or threshold). NOTE: For vehicles equipped with the Smart City Brake System (SCBS), the master warning light also comes ON with the message "SCBS Inspection Required" in the display. The symptoms may occur when the following conditions are met: After starting the engine, the vehicle is driven backwards while the steering wheel is turned to the left or to the right or going forward over a bump while turning the…

FORD · 2018-12-07

Some 2016-2019 F-150 vehicles may exhibit DTC C0051 in the ABS module. This DTC compares steering angle between the power steering control module (PSCM) and ABS and may set due to towing, driving in heavy winds, loose suspension or steering gear components, alignment, or harness or connector concerns with the ABS or PSCM circuits. The ABS pinpoint tests AE, LA, or LB may direct a replacement of the PSCM after disconnecting/reconnecting PSCM connectors. Do not replace the PSCM using ABS Pinpoint tests AE, LA, LB. Refer to the Workshop Manual (WSM) Section, 211-02 to locate the correct PSCM pinpoint tests for the PSCM DTCs that are retrieved during the PSCM self-test. The ABS pinpoint tests are in the process of being updated.

MAZDA · 2018-09-07

Some vehicles may experience the TCS/DSC indicator light and the TPMS warning light both ON with DTC C0051:62 stored in memory.DTC C0051:62 - The difference between the initial learned value of the steering angle (as calculated by each sensor) and the steering angle (as calculated by the steering angle sensor) while driving in a straight line, has exceeded its allowable tolerance (or threshold). NOTE: For vehicles equipped with the Smart City Brake System (SCBS), the master warning light also comes ON with the message "SCBS Inspection Required" in the display. The symptoms may occur when the following conditions are met: After starting the engine, the vehicle is driven backwards while the steering wheel is turned to the left or to the right or going forward over a bump while turning the…

HONDA · 2018-05-02

Service bulletin - There is an internal issue with the millimeter wave radar software, which may lead to one or more of the following symptoms: - The millimeter wave radar is improperly calibrated, resulting in DTC P2583-76 (temporary stop of integrated driver support system [misalignment millimeter wave radar]). - Front radar blindness due to severe weather conditions (rain, snow, fog, etc.) may trigger a sporadic false Radar Obstructed message on the MID. - The vehicle speed fluctuates at highway speeds when adaptive cruise control is set. - DTC C0051-54 (steering angle neutral position learning incomplete), U0416-68 (brake actuator malfunction), and U0416-92 (temporary stop of integrated driver support system [rejected control request by VSA system]) are set after the battery is…

HONDA · 2017-09-23

Service bulletin - There is an internal issue with the millimeter wave radar software, which may lead to one or more of the following symptoms: ? The millimeter wave radar is improperly calibrated, resulting in DTC P2583-76 (temporary stop of integrated driver support system [misalignment millimeter wave radar]). ? Front radar blindness due to severe weather conditions (rain, snow, fog, etc.) may trigger a sporadic false Radar Obstructed message on the MID. ? The vehicle speed fluctuates at highway speeds when adaptive cruise control is set. ? DTC C0051-54 (steering angle neutral position learning incomplete), U0416-68 (brake actuator malfunction), and U0416-92 (temporary stop of integrated driver support system [rejected control request by VSA system]) are set after the battery is…

HONDA · 2017-08-23

Tech line summary article - Normally, any time you disconnect, jump, or replace the battery, DTC C0051-54 (steering angle neutral position learning incomplete) will set. This DTC clears on its own when the vehicle is driven a short distance. You can also clear it by doing the VSA sensor neutral position memorization with the i-HDS.

HONDA · 2017-08-04

Service bulletin - There is an internal issue with the millimeter wave radar software, which may lead to one or more of the following symptoms: ? The millimeter wave radar is improperly calibrated, resulting in DTC P2583-76 (temporary stop of integrated driver support system [misalignment millimeter wave radar]). ? Front radar blindness due to severe weather conditions (rain, snow, fog, etc.) may trigger a sporadic false Radar Obstructed message on the MID. ? The vehicle speed fluctuates at highway speeds when adaptive cruise control is set. ? DTC C0051-54 (steering angle neutral position learning incomplete), U0416-68 (brake actuator malfunction), and U0416-92 (temporary stop of integrated driver support system [rejected control request by VSA system]) are set after the battery is…

HONDA · 2017-04-01

"TECHLINE SUMMARY ARTICLE - NORMALLY, ANY TIME YOU DISCONNECT, JUMP, OR REPLACE THE BATTERY, DTC C0051-54 (STEERING ANGLE NEUTRAL POSITION LEARNING INCOMPLETE) WILL SET. THIS DTC CLEARS ON ITS OWN WHEN THE VEHICLE IS DRIVEN A SHORT DISTANCE. YOU CAN ALSO CLEAR IT BY DOING THE VSA SENSOR NEUTRAL POSITION MEMORIZATION WITH THE I-HDS. BUT DUE TO A SOFTWARE BUG, NOW, WHENEVER THE BATTERY IS DISCONNECTED, JUMPED, OR REPLACED, TWO DTCS ALSO SET AND WON’T GO AWAY ON THEIR OWN."

HONDA · 2016-12-23

"TECHLINE SUMMARY ARTICLE - WHENEVER THE BATTERY IS DISCONNECTED, JUMPED, OR REPLACED, THE FOLLOWING DTC’S ARE STORED: DTC C0051-54 – STEERING ANGLE NEUTRAL POSITION LEARNING INCOMPLETE DTC U0416-68 – VSA NOT ACCEPT REQUEST/TEMP STOP OF INTEGRATED DRIVER SUPPORT DTC U0416-92 – VSA MALFUNCTION/BRAKE ACTUATOR MALFUNCTION"

MAZDA · 2013-09-17

SOME VEHICLES MAY EXPERIENCE THE TCS/DSC INDICATOR LIGHT AND THE TPMS WARNING LIGHT BOTH ON WITH DTC C0051:62 STORED IN MEMORY.•DTC C0051:62 - THE DIFFERENCE BETWEEN THE INITIAL LEARNED VALUE OF THE STEERING ANGLE (AS CALCULATED BY EACH SENSOR) AND THE STEERING ANGLE (AS CALCULATED BY THE STEERING ANGLE SENSOR) WHILE DRIVING IN A STRAIGHT LINE, HAS EXCEEDED ITS ALLOWABLE TOLERANCE (OR THRESHOLD).NOTE:FOR VEHICLES EQUIPPED WITH THE SMART CITY BRAKE SYSTEM (SCBS), THE MASTER WARNING LIGHT ALSO COMES ON WITH THE MESSAGE "SCBS INSPECTION REQUIRED" IN THE DISPLAY.THE SYMPTOMS MAY OCCUR WHEN THE FOLLOWING CONDITIONS ARE MET: •AFTER STARTING THE ENGINE, THE VEHICLE IS DRIVEN BACKWARDS WHILE THE STEERING WHEEL IS TURNED TO THE LEFT OR TO THE RIGHT. THE VEHICLE IS THEN DRIVEN FORWARD AND BEGINS…