C006A · 厂商技术资料

RAM · 2025-02-26

CEL (Check Engine Lamp) C006A-49 Multi-Axis Acceleration Sensor Internal Electronic Failure And C10CC-00 ESC Sensors.

RAM · 2024-10-11

"Flash: Anti-Lock Brake System (ABS) Module Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** ● **C2200-47 - Anti-Lock Brake Module Internal - Watchdog / Safety Auc Failure.** ● C006A-49 - Multi-Axis Acceleration Sensor - Internal Electronic Failure. Customers may also comment on one or more of the following: ● **Anti-lock Brake System (ABS) indicator light illuminated in the Instrument Panel Cluster (IPC). ● Electronic Stability Control (ESC) indicator light illuminated in the IPC. ● The Red Brake Warning indicator light illuminated in the IPC.** This bulletin involves reprogramming the ABS with the latest software available."

DODGE · 2023-10-26

Dynamic Sensor Prior to replacing this part, please ensure all the pre-diagnostic & diagnostic procedures have been completed with emphasis on wiring and connector integrity. If codes C006A-28, U0125-00, or C006A-46 are present, warranty analysis suggests a high likelihood of an intermittent connection at or near the wiring connector, especially if the vehicle is a pursuit variant. Please verify wiring per diagnostic procedures, as well as removal & installation guidance called out in the service manual before replacement.

FORD · 2023-09-18

Some 2023 F-Super Duty vehicles may exhibit diagnostic trouble code (DTC) C006A:00 in the telematics control unit module (TCU). If this is a stand alone DTC and no other codes are present, this may be due to a TCU software concern. To correct the condition, reprogram the TCU using the latest software level of the Ford Diagnosis and Repair System (FDRS) located under the SW Updates tab. For claiming, use causal part 14G229 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

FORD · 2023-03-23

Some 2023 F-Super Duty vehicles may experience diagnostic trouble code (DTC) C006A:00 in the telematics control unit (TCU). If this is a stand alone DTC and no other codes are present, this may be due to a TCU software concern. Replacement or reprogramming of the TCU may not resolve this condition. Inform customers that engineering is currently working on a solution for this condition and will be released via an over the air (OTA) software update expected in Q2 2023. It is recommended that customers that have experienced this concern should verify automatic updates are enabled and that the vehicle has been run long enough to receive updates via OTA. Monitor OASIS for additional information.

FORD, LINCOLN · 2020-08-04

Some 2020 Explorer/Aviator/Police Interceptor Utility vehicles equipped with all-wheel drive (AWD) and built on or before 15-Jul-2020 may exhibit various warning/fault indicators with diagnostic trouble codes (DTCs) C006A:74 and/or P166E stored in the AWD module and/or U0102 stored in the anti-lock brake system (ABS) module. This may be due to the software in the AWD module. To correct the condition, reprogram the AWD module with the latest software level of the appropriate Ford diagnostic scan tool. For claiming, use causal part 7P238 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

RAM · 2020-06-03

Flash: Anti-lock Brake System (ABS) Enhancements This bulletin involves reprogramming the ABS module with the latest software available. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set:C006A-49 - Multi-Axis Acceleration Sensor - Internal Electronic Failure.

RAM · 2020-06-03

Flash: Anti-lock Brake System (ABS) Enhancements This bulletin involves reprogramming the ABS module with the latest software available. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set:C006A-49 - Multi-Axis Acceleration Sensor - Internal Electronic Failure.

RAM · 2020-06-03

ABS Active DTC C006A-49 Multi-axis Acceleration Sensor-Internal Electronic Failure

MERCEDES-BENZ · 2017-09-18

After the update of the ESP software, the DTC C006A4A may be present

RAM · 2015-12-10

Flash: Anti Lock Brake (ABS) Module System Enhancements This bulletin involves updating the Anit-Lock Brake System (ABS) module software. The customer may describe the Electronic Stability Control (ESC) Warning lamp is illuminated on the instrument cluster. Upon further inspection, the technician may find the following Diagnostic Trouble Code (DTC): C006A-49 - Multi-Axis Acceleration Sensor - Internal Electronic Failure.