P0016 · 厂商技术资料

SUBARU · 2026-08-31

This bulletin announces the availability of new reprograming files for the Engine Control Module (ECM) developed to remedy the following DTCs: P0016, P0017, P0018, P0019, P0014, P0024, P0128, P2109. If any of the DTCs listed above are found to be stored in the ECM, follow the procedures outlined in the bulletin. This is an revised version of the original bulletin.

JEEP · 2026-06-06

Not applicable to vehicles built for US market. ENGINE – 1.5 GSE T4 MHEV - Malfunction Indication Light (MIL) P0016 Customers must experience a MIL illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P0016 - Crankshaft/camshaft Timing Misalignment - Bank 1 Sensor 1. Check the trouble codes in the Engine Control Unit (ECU). Apply this document if the trouble code as mentioned is set (P0016). Fix Engine Timing and replace the cam-to-cam guide rail (“snubber”)

JEEP · 2026-05-06

Not applicable to vehicles built for US market. Tensioner Pad Snubber Assembly Issue Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P0016 - Crankshaft/camshaft Timing Misalignment - Bank 1 Sensor 1. Customers may also comment on the following: ● Engine runs rough This bulletin involves inspecting and possibly replacing the tensioner pad snubber. CLAIMS DATA: Labor Operation No: Labor Description Skill Category Labor Tim

CADILLAC, CHEVROLET, GMC · 2026-01-30

This Preliminary information communicates the possibility of DTC p0011 p0016 and potential for a rattle or ticking noise to occur from the Intake Cam Actuator, or cover plate screws backing out and making contact with Cam carrier

FORD, LINCOLN · 2025-11-12

Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. Pinpoint test HK in the Powertrain Control and Emissions Diagnosis (PC/ED) or in Section 303-14 of the Workshop Manual (WSM) has been updated to address this concern.

CADILLAC, CHEVROLET, GMC · 2025-09-08

Certain vehicles will receive a software update to add to the existing Check Engine Light a Driver Information Center (DIC) warning message if DTC P0016 sets. Dealers will reprogram the Engine Control Module (ECM). Owners who have accepted applicable terms and conditions will have the opportunity to accept these software changes using wireless over-the-air (OTA) technology without having to bring their vehicle to a dealership. Alternatively, owners may have their vehicle serviced at a GM dealer to receive these software updates.

CADILLAC, CHEVROLET, GMC · 2025-09-05

Certain vehicles will receive a software update to add to the existing Check Engine Light a Driver Information Center (DIC) warning message if DTC P0016 sets. Dealers will reprogram the Engine Control Module (ECM). Owners who have accepted applicable terms and conditions will have the opportunity to accept these software changes using wireless over-the-air (OTA) technology without having to bring their vehicle to a dealership. Alternatively, owners may have their vehicle serviced at a GM dealer to receive these software updates.

CADILLAC, CHEVROLET, GMC · 2025-08-28

Certain vehicles will receive a software update to add to the existing Check Engine Light a Driver Information Center (DIC) warning message if DTC P0016 sets. Dealers will reprogram the Engine Control Module (ECM). Owners who have accepted applicable terms and conditions will have the opportunity to accept these software changes using wireless over-the-air (OTA) technology without having to bring their vehicle to a dealership. Alternatively, owners may have their vehicle serviced at a GM dealer to receive these software updates.

BUICK, CHEVROLET · 2025-08-22

This Preliminary information communicates the possibility of an engine surge or misfire with one or more of the following dtc's P0300/P0011/P0014/P0016/P0017 due to potential debris in the cam actuators

CADILLAC, CHEVROLET, GMC · 2025-08-14

Certain vehicles will receive a software update to add to the existing Check Engine Light a Driver Information Center (DIC) warning message if DTC P0016 sets. Dealers will reprogram the Engine Control Module (ECM). Owners who have accepted applicable terms and conditions will have the opportunity to accept these software changes using wireless over-the-air (OTA) technology without having to bring their vehicle to a dealership. Alternatively, owners may have their vehicle serviced at a GM dealer to receive these software updates.

SUBARU · 2025-03-04

"This bulletin announces availability of new reprograming files for the Engine Control Module (ECM) developed to remedy the following DTCs: • P0016: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor A • P0017: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor B • P0018: Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor A • P0019: Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor B • P0087: Fuel Rail/System Pressure – Too Low Bank 1 These files contain enhanced logic for the self-diagnosis program of the ECM and to optimize stabilization of fuel pressure. "

SUBARU · 2024-11-14

"This bulletin announces availability of new reprograming files for the Engine Control Module (ECM) developed to remedy the following DTCs: • P0016: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor A • P0017: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor B • P0018: Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor A • P0019: Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor B • P2404: Evap System Leak Detection Pump Sense Circuit Range/Performance • P0011: “A” Camshaft Position - Timing Over-Advanced or System Performance Bank 1 • P0012: “A” Camshaft Position - Timing Over-Advanced or System Performance Bank 2 • U0100: Lost Communication with ECM/PCM “A”"

SUBARU · 2024-10-08

"This bulletin announces availability of new reprograming files for the Engine Control Module (ECM) developed to remedy the following DTCs: • P0016: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor A • P0017: Crankshaft Position - Camshaft Position Correlation Bank 1 Sensor B • P0018: Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor A • P0019: Crankshaft Position - Camshaft Position Correlation Bank 2 Sensor B • P2404: Evap System Leak Detection Pump Sense Circuit Range/Performance • P0011: “A” Camshaft Position - Timing Over-Advanced or System Performance Bank 1 and • P0012: “A” Camshaft Position - Timing Over-Advanced or System Performance Bank 2. • U0100: Lost Communication with ECM/PCM “A”"

SUBARU · 2024-07-08

"This bulletin announces availability of new reprograming files for the Engine Control Module (ECM) developed to remedy the following DTCs: P0016, P0017, P0018, P0019, P0087."

CADILLAC, CHEVROLET, GMC · 2023-05-11

This service bulletin provides information for dealers/technicians on Rough Idle, Malfunction Indicator Lamp (MIL) Illuminated After Engine Repairs with DTCs P0016 and/or P0018 Set.

MACK · 2022-05-27

Diagnostic Trouble Codes ( DTC ) P0016-76 - Crankshaft Position - Camshaft Position Correlation - Turbo Compound ( TC ) - Model Year 2018 and Newer

VOLVO · 2022-05-27

Diagnostic Trouble Codes ( DTC ) P0016-76 - Crankshaft Position - Camshaft Position Correlation - Turbo Compound ( TC ) - Model Year 2018 and Newer

KIA · 2022-05-25

PITSTOP: DTC P0011/ P0014/ P0016/ P0017 DUE TO INCORRECT CAMSHAFT RELUCTOR WHEEL CONFIGURATION - This Pitstop provides information on some 2010-2013MY Soul (AM), 2014-2019MY Soul (PS), and 2020~MY Soul (SK3) vehicles equipped with the engines listed below, which may set DTC P0011, P0014, P0016, or P0017 after an engine replacement. If these DTCs were not present prior to engine replacement, the camshaft reluctor wheel (also called pulse wheel) may not be in the correct position when engine is at Top Dead Center and may be sending an erroneous signal to the PCM, causing the DTC. Follow the procedure outlined in this publication, with engine set to Top Dead Center (TDC), to inspect and identify whether the reluctor wheel is correctly clocked on the camshaft, and if not, how to correctly…

CADILLAC, CHEVROLET, GMC · 2022-05-18

This Preliminary information communicates to the dealers information related to a Malfunction Indicator Lamp (MIL) Illuminated with Any Combination of DTCs P0011 P0014 P0016 P0017 Setting. Advises to perform Strategy Based Diagnosis and to replace the affected Camshaft Position Actuator Magnet as necessary.

FORD, LINCOLN · 2021-08-27

Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK12 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

FORD · 2021-07-19

Some 2020 Transit vehicles equipped with a 3.5L Duratec engine and all 2021 Transit vehicles built on or before 01-Jul-2021 may experience an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021 and P0022. This may be due to the software in the powertrain control module (PCM). To correct the condition, perform a variable camshaft timing (VCT) cycling and reprogram the PCM.

FORD, LINCOLN · 2021-05-24

Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

AUDI · 2021-04-13

This bulletin states that if DTC P227900, P001600, and DTC P001700 recorded together in the ECM to follow the isntructions on replacing the intake manifold pressure sender.

BUICK, CADILLAC, CHEVROLET, GMC · 2021-03-09

This Preliminary information communicates additional diagnostic information for DTC's P0016 and P0018.

VOLVO · 2021-01-19

"Diagnostic Trouble Codes ( DTC ) P0016-76 - Crankshaft Position - Camshaft Position Correlation - Turbo Compound ( TC ) - Model Year 2018 and Newer "

MACK · 2021-01-19

"Diagnostic Trouble Codes ( DTC ) P0016-76 - Crankshaft Position - Camshaft Position Correlation - Turbo Compound ( TC ) - Model Year 2018 and Newer "

BUICK, CADILLAC, CHEVROLET, GMC · 2020-12-29

This Preliminary information communicates additional diagnostic information for DTC's P0016 and P0018.

BUICK, CHEVROLET · 2020-07-28

This technical bulletin provides a procedure to correct conditions of Engine Idle Unstable, Malfunction Indicator Lamp (MIL) Illuminated - DTC P0011, P0014, P0016, P0017, P05CC and/or P05CE Set.

JEEP · 2020-07-25

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P0456 - EVAP System Small Leak. P0340 - Camshaft Position Sensor Circuit - Bank 1 Sensor 1. P0016 - Crankshaft/Camshaft Timing Misalignment - Bank 1 Sensor 1. P0606 - Control Module Processor. Customers may also experience the following:Vehicle periodically may fail to start(ED6 engine only).

JEEP · 2020-07-25

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set:P0456 - EVAP System Small Leak. P0340 - Camshaft Position Sensor Circuit - Bank 1 Sensor 1. P0016 - Crankshaft/Camshaft Timing Misalignment - Bank 1 Sensor 1. P0606 - Control Module Processor. Customers may also experience the following:Vehicle periodically may fail to start(ED6 engine only).