参考含义
这个码是什么意思?
以下表述对应所列厂商与通报。使用前请核对完整报码、报码模块、年款和发动机。
故障码描述检测到的异常,不直接指定必须更换的零件。
限定车辆范围
车型关联可作为查阅线索;具体发动机、生产范围和软件条件请核对厂商资料。
更换零件之前
记录报码及冻结帧,检查蓄电池状态、相关报码和可见的线束或软管损伤。按照该车诊断流程和测试结果决定维修,避免仅凭故障码换件。
扫描记录表 →厂商原文中的含义
原文含义可能随车型和后缀变化。此处按来源展示,不代表通用诊断结论。
P0524Low oil pressure (during start up in cold ambient temps)
P0524:00Engine oil pressure too low
P0524:00ENGINE OIL PRESSURE TOO LOW THIS IS CAUSED BY A DROP IN ENGINE OIL PRESSURE DUE TO A PIECE OF FOREIGN OBJECT STUCK ON THE OIL PUMP PRESSURE RELIEF VALVE OR OCV
厂商技术资料
76以下为英文原文
MAZDA
Some vehicle may exhibit the CHECK ENGINE light on with DTC P0524 (Engine oil pressure control system: Oil pressure decrease) and no abnormal engine noise. This may be caused by a malfunction of the oil pressure control valve (located at the rear of the engine block near the oil filter) due to machining contamination inside the …
FORD, LINCOLN
Some 2016-2017 Edge/MKX, 2017 Continental/Fusion/MKZ vehicles equipped with a 2.7L or 3.0L EcoBoost engine and built on 1-Apr-2016 and through 1-Jan-2017 may exhibit white or blue smoke from the exhaust, rough idle in neutral or park at normal operating temperature or after a hot restart. The vehicle may also exhibit an illumina…
MERCEDES-BENZ
Complaint Red oil pressure warning in instrument cluster One of the below fault codes is stored in powertrain control unit N127: P052497 The oil pressure is too low. The system function is restricted. P052400 The oil pressure is too low Cause Various Remedy If low oil level warning present diagnose cause of this first. -Check en…
VOLVO
These repair instructions are intended to address the following fault: P0524-00 (Engine Oil Pressure Too Low).
核对适用车辆
380车型关联可作为查阅线索;具体发动机、生产范围和软件条件请核对厂商资料。
| 品牌 | 车型 | 年款 |
|---|---|---|
| Bentley | BENTAYGA ↗ | 2024 |
| Bentley | BENTAYGA ↗ | 2023 |
| Bentley | BENTAYGA ↗ | 2022 |
| Bentley | BENTAYGA ↗ | 2021 |
| Bentley | BENTAYGA ↗ | 2020 |
| Bentley | BENTAYGA ↗ | 2018 |
| Bentley | BENTAYGA ↗ | 2017 |
| Bentley | BENTAYGA HYBRID ↗ | 2023 |
还能继续驾驶吗?
仅靠故障码无法判断是否适合继续行驶。故障灯闪烁、严重抖动、过热、机油压力报警或制动转向异常都需及时处理。影响车辆控制或发动机安全时,应在安全地点停车并寻求帮助。以车辆手册为准。