参考含义
这个码是什么意思?
以下表述对应所列厂商与通报。使用前请核对完整报码、报码模块、年款和发动机。
故障码描述检测到的异常,不直接指定必须更换的零件。
限定车辆范围
车型关联可作为查阅线索;具体发动机、生产范围和软件条件请核对厂商资料。
更换零件之前
记录报码及冻结帧,检查蓄电池状态、相关报码和可见的线束或软管损伤。按照该车诊断流程和测试结果决定维修,避免仅凭故障码换件。
扫描记录表 →厂商原文中的含义
原文含义可能随车型和后缀变化。此处按来源展示,不代表通用诊断结论。
P22A7NOx Sensor Heater Circuit Performance - Bank 1 Sensor 2 (For non-ammonia delete systems only)
厂商技术资料
8以下为英文原文
FORD
Some 2023 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) U029D, U029E, U02A1, U02A3, P2209, P24D0, P22A7, and/or P23B5. This may be due to a wiring chafe on harness 14406 near connector C146 touching the exhaust gas recirculation (…
FORD
Some 2023 F-Super Duty vehicles equipped with a 6.7L engine, and built on or before 02-May-2023, may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) U029D, U029E, U02A1, U02A3, P2209, P24D0, P22A7, and/or P23B5. This may be due to a wiring chafe on harness 14406 near connector C146 tou…
FORD
Some 2017-2020 F-Super Duty vehicles equipped with a 6.7L engine built on or before 10-Jun-2020 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) U029D, U029E, P22A7 and/or P2209 in the powertrain control module (PCM). This may be due to water intrusion into the oxides of nitrogen (…
RAM
Flash: 6.7L Diagnostic And System Improvements This bulletin involves selectively erasing and reprogramming the Engine Control Module (ECM) with new software. Several software improvements are available for vehicles equipped with a Cummins 6.7L turbo Diesel. NOTE: There will be a choice between 2 calibrations. One for vehicles t…
核对适用车辆
39车型关联可作为查阅线索;具体发动机、生产范围和软件条件请核对厂商资料。
| 品牌 | 车型 | 年款 |
|---|---|---|
| Ford | F-250 SD ↗ | 2023 |
| Ford | F-250 SD ↗ | 2020 |
| Ford | F-250 SD ↗ | 2019 |
| Ford | F-250 SD ↗ | 2018 |
| Ford | F-250 SD ↗ | 2017 |
| Ford | F-250 SD ↗ | 2014 |
| Ford | F-250 SD ↗ | 2013 |
| Ford | F-350 SD ↗ | 2023 |
还能继续驾驶吗?
仅靠故障码无法判断是否适合继续行驶。故障灯闪烁、严重抖动、过热、机油压力报警或制动转向异常都需及时处理。影响车辆控制或发动机安全时,应在安全地点停车并寻求帮助。以车辆手册为准。