查看

动力总成

P3006

故障码含义与厂商资料

OBD-II / DTC

参考含义

这个码是什么意思?

以下表述对应所列厂商与通报。使用前请核对完整报码、报码模块、年款和发动机。

故障码描述检测到的异常,不直接指定必须更换的零件。

限定车辆范围

车型关联可作为查阅线索;具体发动机、生产范围和软件条件请核对厂商资料。

更换零件之前

记录报码及冻结帧,检查蓄电池状态、相关报码和可见的线束或软管损伤。按照该车诊断流程和测试结果决定维修,避免仅凭故障码换件。

扫描记录表 →

厂商技术资料

5

以下为英文原文

查看全部 ↗

FREIGHTLINER, MERCEDES-BENZ

Complaint The customer reports that the engine cranks but does not start, or only starts after extended cranking. A check engine light may be present, and fault codes P300616 (The fuel pressure in the system is too low) and/or P300617 (The fuel pressure in the system is too low) may be stored, along with other fuel pressure-rela…

FREIGHTLINER, MERCEDES-BENZ

Vehicles with SCR Generation 4: SCR/AdBlue® warning message cannot be reset with fault code P13DF00 or P300685 Complaint SCR or AdBlue warning message cannot be reset. All fault codes in the AdBlue (SCR) control unit have been processed and corrected, however fault codes P13DF00 or P300685 remain active and stored. Cause The pro…

FREIGHTLINER, MERCEDES-BENZ

Vehicles with SCR Generation 4: SCR/AdBlue® warning message cannot be reset with fault code P13DF00 or P300685 Complaint Vehicles with SCR Generation 4: SCR/AdBlue® warning message cannot be reset. Information: All fault codes in the AdBlue® (SCR) control unit have been processed and corrected; however, fault codes P13DF00 and P…

FREIGHTLINER, MERCEDES-BENZ

Complaint Vehicles with SCR Generation 4: SCR/AdBlue® warning message cannot be reset. Information: All fault codes in the AdBlue® (SCR) control unit have been processed and corrected; however, fault codes P13DF00 and P300685 remain active and stored in the AdBlue® (SCR) control unit. Cause The procedure for resetting the SCR/Ad…

核对适用车辆

56

车型关联可作为查阅线索;具体发动机、生产范围和软件条件请核对厂商资料。

查看全部 ↗

品牌车型年款
FreightlinerSPRINTER (VS30) ↗2020
FreightlinerSPRINTER (VS30) ↗2019
FreightlinerSPRINTER 1500 ↗2024
FreightlinerSPRINTER 1500 ↗2023
FreightlinerSPRINTER 1500 ↗2022
FreightlinerSPRINTER 1500 ↗2021
FreightlinerSPRINTER 1500 ↗2020
FreightlinerSPRINTER 1500 ↗2019

还能继续驾驶吗?

仅靠故障码无法判断是否适合继续行驶。故障灯闪烁、严重抖动、过热、机油压力报警或制动转向异常都需及时处理。影响车辆控制或发动机安全时,应在安全地点停车并寻求帮助。以车辆手册为准。