FORD

16-0052

2016-03-24 · NHTSA 10075282

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

1.6L GTDI - SERVICE ENGINE SOON LIGHT - DTC P26B7 - BUILT ON OR BEFORE 2/13/2013 ISSUE Some 2013 Escape vehicles equipped with 1.6L Gasoline Turbocharged Direct Injection (GTDI) engine built on or before 2/13/2013 may exhibit a service engine soon lamp illuminated with diagnostic trouble code (DTC) P26B7 stored in powertrain control module (PCM) memory. This DTC indicates a fault is present with coolant bypass solenoid C, located at the rear of the engine above the starter/bell housing and below the vacuum pump. SERVICE PROCEDURE 1. Using the Ford Integrated Diagnostic System (IDS) service tool or equivalent scan tool, retrieve continuous memory DTCs. Is DTC P26B7 present in PCM memory? a. Yes - proceed to Steps 2. b. No - this article does not apply. Refer to the Powertrain Control/Emissions Diagnosis (PC/ED) manual for normal diagnostics. 2. Replace the engine coolant bypass valve with a new service part. Refer to Workshop Manual (WSM), Section 303-03. 3. Reprogram the PCM to the latest calibration using IDS release 83.03 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraft.com.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。