TOYOTA

T-SB-0038-15

2015-06-12 · NHTSA 10111138

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

TSB: Some 2008 - 2013 model year Highlander and Highlander HV vehicles may exhibit a condition where the Power Back Door does NOT close properly. The back door may get to the fully closed position and then reverse to the open position. In cases where the Power Back Door does close, a pop or clunk noise may also be heard when the back door latch reaches the striker during the power close function. In some cases, Diagnostic Trouble Codes (DTCs) B2222 and/or U0230 may be present. Use the following information to inspect the Power Back Door and address this condition. NOTICE The purpose of this Service Bulletin is to provide repair instructions for the Power Back Door. It enhances the durability of the Power Back Door when using the Power Close function. When the Power Close function is used, if objects or cargo continually interferes with the closure of the back door, damage to the back door and/or back door hinges may occur. To minimize the possibility of damage occurring, before closing the Power Back Door, customers should always confirm that objects in the cargo area will not impede or interfere with the closing operation of the back door. Additionally, customers should not use any part of their body to intentionally activate the Jam Protection function of the Power Back Door. Please see the Owner?s Manual for additional information on the Power Back Door Jam Protection function.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。