FIAT

08-010-16

2016-01-28 · NHTSA 10121931

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Flash: Diagnostic And System Improvements This bulletin involves updating the Body Control Module (BCM), Powertrain Control Module (PCM), Transmission Control Module (TCM) with the latest available software. All three modules must be updated in this service action. Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs): · P0711 - Transmission Fluid Temperature Sensor A Circuit Range-Performance. · P1CC9 - Unable to Engage Gear. · P1D98 - Incorrect Gear Ratio Clutch B or D Defective. · P1DAD - Input Shaft-Output Shaft Direction Correlation. · U1424 - Implausible Engine Torque Signal Received. In addition, the customer may also experience one or more of the following transmission related conditions: · Garage Shifts (Shifting from Park or Neutral into Drive or Reverse). · Harsh 1-2 upshifts. · Less than desired accelerator pedal response in Sport and Traction Plus modes. · RPM flare at engine start. · Less than desired idle performance when shifting into DRIVE or REVERSE following a cold start. The following enhancements are included in the software update: · Vehicle performance enhancements. · Improve transmission shift enhancements for sand and snow mode. · Improved paddle shifter operation. Body Control Module (BCM) A customer may describe that the remote key is not recognized and doesn't open/close door locks. In some cases the engine may not start due to the fact that a valid key is not recognized. Upon further investigation the technician may find the Diagnostic Trouble Codes (DTCs): · B105A-64 - Doors Lock All-Signal Plausibility Failure. · B105D-64 - Doors Deadlock Or Unlock Driver-Signal Plausibility Failure.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。