ISUZU

SB18N001A

2019-05-01 · NHTSA 10162991

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

SOME CUSTOMERS MAY COMPLAIN OF AN ILLUMINATED CHECK ENGINE MALFUNCTION INDICATOR LIGHT (MIL) ASSOCIATED WITH DIAGNOSTIC TROUBLE CODE (DTC) U0106, LOST COMMUNICATION WITH GLOW PLUG CONTROL MODULE (GPCM). THIS CONDITION MAY BE THE RESULT OF WATER INTRUSION INTO THE GPCM CONNECTOR. WATER FROM RAIN AND OTHER OUTSIDE SOURCES CAN POOL IN THE GLOW PLUG RECESSED AREA ON THE OUTSIDE OF THE CYLINDER HEAD. IF ENOUGH WATER ACCUMULATES, IT CAN SEEP INTO THE GLOW PLUG HARNESS THROUGH THE TERMINAL ENDS AND ENTER THE GPCM CONNECTOR, CAUSING THIS DTC TO SET. IF THIS DTC IS FOUND AND EVIDENCE OF WATER IS PRESENT IN THE GPCM CONNECTOR, REPLACE THE GLOW PLUG HARNESS TERMINALS AND REAR PANEL COVER AS OUTLINED IN THE SERVICE PROCEDURE IN THIS BULLETIN. THE REPLACEMENT TERMINAL ENDS ARE SEALED SO THAT WATER CANNOT GET INOT AND THROUGH THE WIRE.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。