CADILLAC

PIP5202C

2020-05-06 · NHTSA 10176301

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

This Preliminary Information communication provides information to the technician the steps to diagnose and repair vehicles that have Check Engine Light illuminated with an "Engine Unavailable" and "Reduced Propulsion" messages on the Driver Information Center. Technician may find Diagnostic Trouble Codes a P0AB9 and P0AC4. Technician should not clear any Diagnostic Trouble Codes and ensure Global Diagnostic System 2 is up to date. Technician will need to use Global Diagnostic System 2 and check all modules for Diagnostic Trouble Codes. Now use Global Diagnostic System 2 to create freeze frame data from Hybrid Powertrain Control Module and the Engine Control Module and save a report. Technician will need to verify that the vehicle had not been run very low or out of fuel. Also verify the customer did not press the Power Button causing the vehicle to turn off while driving. Verify that the Internal Combustion Engine runs properly and no other engine related or communication related Diagnostic Trouble Codes are present. Technician should inquire if the remote star was used on the last two drive cycles before the Diagnostic Trouble Code set. Technician should update the Engine Control Module if so. Technician should inspect the ground locations G106 (engine block) and G113 (drive unit case) have been cleaned and are secure making sure the ground eyelets do not spin. Technician should also check for past service history for prior mechanical engine or wiring harness repairs. Inspect the cam timing connector and repair any damage.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。