FORD

SSM 49844

2021-06-02 · NHTSA 10198602

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Some 2016 F-Super Duty/F-650/F-750 vehicles equipped with a 6.7L engine built on or before 15-Feb-2016 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P054F stored in the powertrain control module (PCM). This may be caused by the torque converter one way clutch. To correct the condition, perform the torque converter stall speed test. Refer to Workshop Manual (WSM) Section 307-01B > Special Testing Procedures > Stall Speed Test. For this specific condition, the line pressure test is not required prior to performing the stall speed test. If engine stall speed does not reach the minimum RPM range specified, replace the torque converter, torque convertor hub seal, and fluid filter. Perform the transmission fluid cooler backflushing and cleaning procedure and refill the fluid. Refer to WSM, Section 307-01B.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。