查看

MERCEDES-BENZ, MERCEDES-MAYBACH

LI20.10-P-074284

2022-01-26 · NHTSA 10207184

車型關聯可作查閱線索;引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Complaint Check engine light illuminated. Fault code P012800 current or stored in MRG1AMGV8 control unit. Cause Thermostat may not close completely Remedy 1-Perform coolant warmup test via fault P012800 and save the results 2-Drain coolant through fine sieve or filter and check for debris. 3-Remove and replace coolant thermostat. Check for any debris in thermostat or connections on engine. If debris found in step 2 or 3, flush engine and take pictures of debris. 4-Refill cooling circuit and clear faults. Warm engine during test drive. Allow to cool 6 hours. 5-Repeat coolant warmup test and save results. If LI was previously applied to the vehicle open a PTSS case with the below documents. -Initial quick test -MRG1AMGV8 control unit log -Coolant warmup tests before and after repair from previous visit -Coolant warmup test from current visit

NHTSA 原廠通報資料 ↗

僅在原廠、通報編號、發布日期和完整摘要一致時,才合併重複登錄,並保留原始編號。舊資料仍可查閱;確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示;未註明年式不等於所有年式適用。