BENTLEY

2066480/1

2022-06-22 · NHTSA 10215584

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Headlamp switch not working/not illuminated - Numerous DTCs within 0009-Central Electrics (BCM1). Customer statement / workshop findings Customer statement: - Headlamp switch not working/not illuminated when the ignition is switched on (following an ignition switch off) And/or - Yellow warning light/message within DIP (Adaptive lighting fault) And/or - Loss of rear fog light activation And/or - Loss of all-weather lighting mode activation And/or - Headlamps will default to dipped beam (however, high beam activation will still be possible manually) Workshop findings: The following DTCs may also be evident within 0009 - Central Electrics control module U110B00 - Light switch no communication And/or B126A29 - Light switch signal not reliable And/or U1122300 - Fault value received by data bus Technical background - The condition will not occur when the ignition is on or whilst the vehicle is being driven - The condition only occurs as the headlamp switch goes into a Sleep state after the ignition is switched off - The condition is evident to the driver when the ignition is next switched on In the event the afore mentioned symptoms are evident please carry out the instructions within the Measure section

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。