RAM

9003615

2017-03-01 · NHTSA 10217518

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Electronic Shifter Module (ESM) If DTC's U1465, U1466, U1267 are present Stored or Active OR if U114C is Active, please replace the PRNDM and Shifter with the following NIK: 04670682AG Shifter Lower & one of the following PRNDM's which applies; 68253107AC LHD BASE PRNDM 68253112AC RHD BASE PRNDM 68286830AD LHD SRT PRNDM 68286828AD RHD SRT PRNDM Special Notes below from previous TechTip; NOTE 1: If mismatch between shifter NIK and PRNDM occur, it may appear that the PRNDM will not light up the first time the shifter is woken up via CAN. Please wait 2 minutes 15 seconds for the PRNDM lights to come back on. This is due to a software update feature of the Shifter lower (04670682A$). During PRNDM software update, the shifter will not be Functional. NOTE 2: If Shifter is awake on CAN while disconnecting PRNDM from Shifter (04670682A$), U114C-00 will activate. NOTE 3: PRNDM supply Voltage from Shifter will be deactivated after 3 seconds if PRNDM is disconnected from Shifter while Shifter is awake via CAN and U114C-00 will activate. Power to Shifter will have to be removed for approx.. 20 seconds after PRNDM is connected to reset power to PRNDM from the Shifter. Power can be reset by removing battery power or disconnecting the shifter main connector. This is due to a safety feature built into the Shifter that will cut power to the PRNDM if a communication error is observed between the Shifter and PRNDM. NOTE 4: If Shifter is not responsive after Dead Battery condition, Charge Battery, and once complete disconnect battery terminals for 30 seconds and reconnect. Check Shifter functionality. Please return parts back to FCA Engineering if PRNDM is deemed non-functional after performing this TechTip.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。