JEEP

1809119

2019-11-02 · NHTSA 10220076

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set:DTC P1DD2 will be stored in the Transmission Control Module (TCM) however no DTCs will be stored in the PCM. Verify no unrelated codes are stored in the PCM before flashing. If codes are stored in the PCM, normal diagnosis should be performed.P06E9 - Engine Starter Performance(North America Only). C050D - Wheel Speed Signal Left Rear Rationality. C0501 - Wheel Speed Signal Left Front Rationality. C0507 - Wheel Speed Signal Right Front Rationality. C0513 - Wheel Speed Signal Right Rear Rationality. DTC P1DD2 - Torque Request Signal From TCM Denied will be present, set by the TCM and the vehicle will be in limp home mode(Sales Codes DF5 and DF7 - Automatic Transmission Vehicles Only). DTC U1428 - Inaccurate Engine Torque Received(Sales Codes DF5 and DF7 Only). Customers may also comment on one of the following:Vehicle will intermittently not start(South Korea Only). The vehicle is in limp home mode (shift RPMs are limited) with no DTCs set(Sales Code DE1 - Manual Transmission Vehicles Only).

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。