JEEP

0807719

2019-11-05 · NHTSA 10220081

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Flash: Body Control Module (BCM) Updates This bulletin involves reprogramming the BCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set:B25C9 - Driver Door Ajar Switch 2 Stuck Closed (Module, Powertrain Control (PCM)). Stored DTC only, this update is not for active fault.If B25C9 is an active fault normal diagnostic must be performed. This software update will not correct active DTC. P26E4-64 - Starter Control 2 Circuit-Signal Plausibility Failure. In addition, customers or technicians may comment on one or more of the following:The vehicle will not restart when in Engine Stop/Start (ESS) mode. Customers will have to shift into park and cycle the ignition to get the vehicle to start again. The vehicle cranks but fails to start, the customer will have a message on the Instrument Panel Cluster (IPC) "press brake and push ignition button to start" after this happens they must perform a key cycle function with their foot off the brake, then the vehicle will restart normally. Vehicle Theft Alarm (VTA) triggers randomly. Automatic rain sensing wipers inoperative when the vehicle is restarting from Stop&Start event the wipers may not restart. Switching the wipers to off then back to on again will resume operation. VTA is enabled in ?Ship Mode?.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。