JEEP

1809219

2019-11-06 · NHTSA 10220084

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technicianmay find one or more of the following Diagnostic Trouble Codes (DTCs):P06EF - Engine Restart Performance. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT)to determine if a leak is present in the system. Customers may experience one or more of the following:Excessive blower fan noise when the A/C is on MAX output. Intermittentrough idle or idle surging, when coming to a stop(Automatic transmission equipped vehicles only). Random Electronic Stability Control (ESC) lamp illuminates in the InstrumentPanel Cluster (IPC). Driving at vehicle speeds while in first gear and shifting into neutral, amessage "Shift to 1st gear not allowed" message appears in the Electronic Vehicle Information Center (EVIC) when conditions are not met(Manual transmission equipped vehicles only). 3 km (2 mph) difference between cruise set speed versus actual displayspeed. During cold vehicle operation and the use of cruise control on vehicles equipped with an automatic transmission, the engine RPMs may dropbelow idle speed while cruise control is engaged, this may occur if the customer presses the accelerator pedal to achieve a vehicle speedgreater than the cruise control speed and then releasing it. Radio or IPC may reboot (flash off/flash on) during an Engine Stop Start(ESS) shutdown in cold conditions with a battery temperature below -12°C (10°F).

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。