HYUNDAI

23-EE-002H

2023-02-16 · NHTSA 10232192

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

This bulletin provides information related to the Engine Control Module (ECM) / Hybrid Control Unit (HCU) software update for Tucson Hybrid (NX4 HEV) / Plug-in Hybrid (NX4 PHEV) vehicles to improve the following DTC and symptoms: 1. P1441 (EVAP System Flow During Non-Purge Condition) a. Misdiagnosis due to insufficient margin of pressure deviation when driving at constant speed with low engine load i. Logic improvement to eliminate misdiagnosis 2. P1A77 (Check Generator Belt) a. Misdiagnosis due to poor synchronization release when the engine is stopped i. Logic improvement to release synchronization even if CAM signal is active when engine is stopped 3. P00B7 (Engine Coolant Flow Low/Performance) a. ITM control error due to temporary ball valve stuck i. Improvement to ITM cleaning logic (1 time -> 5 times) 4. P2118 (Throttle Actuator Control Motor Current Range/Performance) / P0401 (EGR Flow Insufficient Detected) 5. P0236 (Turbocharger System Boost Sensor A Circuit Range/Performance) / P0299 (Turbocharger underboost) a. Failure due to EGR condensate freezing i. Change the EGR Flow diagnosis condition (-40℃ → -7℃) 6. P2B60 (Engine Coolant Flow Control Valve Position Sensor Circuit Range/Performance) a. Insufficient control at the end point when ITM cleaning logic completes operation i. Improve the ITM cleaning logic for better control 7. Oil Dilution: Some vehicles may experience increased oil consumption and white smoke due to the diluting of engine oil with fuel because of the frequent transition between EV ↔ Engine mode during the winter season a. Modify fuel injection strategy below 10℃ and add oil heating function based on the driving pattern.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。