FORD

SSM 51359

2023-02-14 · NHTSA 10232421

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Some 2023 Bronco vehicles equipped with 2.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P04DB stored in the powertrain control module (PCM). This may be due to a fault detected while in transport mode or a leak in the positive crankcase ventilation system (PCV). To correct the condition, perform a visual inspection of all possible sources outlined in Workshop Manual (WSM), Section 303-08B pinpoint test (PPT) HG. Deactivate transport mode and place into normal operation mode, refer to WSM, Section 419-10. Clear all DTCs, allow the vehicle to sit with key off for at least 2 hours or until engine coolant temperature (ECT) is below 45°C (113°F). Start the vehicle and allow it to idle in park (P) for at least 1 minute. Using the appropriate scan tool, check for DTCs. If DTC P04DB returns, perform PPT HG in the WSM.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。