MAZDA

08-003-23a

2023-07-26 · NHTSA 10240372

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Some vehicles may exhibit that the air bag warning light turns on or repeats cycles of turning on and off with DTC B1126:13 and/or B1127:13 stored in memory. B1126:13 - Driver-side side air bag module circuit open circuit or resistance high B1127:13 - Passenger-side side air bag module circuit open circuit or resistance high This issue is caused by any of the following: When the driver or passenger moves, a load is applied to the seat back and the load may cause displacement of the mating terminals in the side air bag module connector, resulting in insufficient contact and higher resistance. The DTC detection level is too sensitive. The form of the female terminals in the side air bag module connector may cause insufficient contact and higher resistance. To eliminate these concerns, (1) the DTC detection level of the SAS control module has been optimized, (2) the design of the side air bag module connector has been modified, and (3) the layout of the side air bag module connector has been modified.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。