JEEP

18-004-24 REV. B

2024-08-08 · NHTSA 11006243

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

"Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ● **P00F3-00 - Humidity Sensor Circuit Range-performance.** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. ● P0461-00 - Fuel Level Sensor ""A"" Circuit Range/Performance. ● P051B-00 - Crankcase Pressure Sensor Circuit Range/Performance. ● P2F64-00 - Ion Sense Feedback Circuit A. ● P0331-00 - Knock Sensor 2 Circuit Range/Performance. ● P0300-00 - Multiple Cylinder Misfire. ● P2C90-00 - Crankcase Ventilation System - Hose ""A"" Disconnected. ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or System Performance. ● P0604-00 - Internal Control Module Random Access Memory Ram Error. ● P060C-00 - Internal Control Module Main Processor Performance. **Customers may also comment on the following: ● Undesirable vehicle drivability behavior causing the a Shift to Park event during Engine Stop Start (ESS) while Adaptive Cruise Control (ACC) is active. ● Pressing ACC button while ESS active can shift the vehicle to park. ● Idle speed oscillations observed when in Snow and Mud modes. ● Poor engine performance (undershoots engine speed) for ESS and for non-ESS engine start. ● Screen two incorrectly pops up on the Instrument Cluster Panel (IPC) for 5 seconds during Terrain and Rock mode. ● Vehicle performance complaints when coasting at lower speeds.** This bulletin involves reprogramming the PCM with the latest available software."

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。