JEEP

18-001-24 REV. C

2024-09-07 · NHTSA 11007658

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

"Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician must find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ● **P0629 - Fuel Pump Control Circuit High. ● P0171 - Fuel system Lean. ● P0087 - Fuel Rail Pressure Too Low - Bank 1.** ● P16F0-00 - SPI Comm Hardware Fault. Customers may also experience one or more of the following: ● **The rear half shafts are damaged due to pressing the accelerator in drive with the Electric Parking Brake (EPB) applied. ● The Oxygen Sensor (02) can give wrong values when entering EV mode, triggering a false MIL. ● The Instrument Cluster Panel (ICP) unable to calculate the instantaneous fuel economy under heavy acceleration. ● Variable Speed Fuel Pump inoperative after refueling (no start).** ● Intelligent sign recognition is not working properly causing degradation in active speed limiting functionality (IAP Only). ● Shifts rough occasionally when coming down to a stop. ● Shifts rough occasionally when accelerating. ● Shifts rough when transitioning from EV to Hybrid operation on low SoC. ● Shifts rough when engines starts. ● On part throttle accelerations with little to no battery available the transition from battery power to engine on is harsh and abrupt. ● The engine oil life on dashboard drops down too fast when the engine oil dilution reaches high level without the ability to recover. This bulletin involves reprogramming the PCM, Transmission Control Module (TCM) and the Auxiliary Hybrid Control Processor (AHCP) also known as Power Inverter Module (PIM), with the latest available software."

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。