JEEP

18-008-25

2025-03-01 · NHTSA 11014739

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Flash: Powertrain Control Module (PCM) Updates "Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0032 - O2 - Sensor 1/1 Heater Circuit High. ● P0038 - O2 - Sensor 1/2 Heater Circuit High. ● P0052 - O2 - Sensor 2/1 Heater Circuit High. ● P0058 - O2 - Sensor 2/2 Heater Circuit High. ● P1129 - Closed Loop Fueling Not Achieved-Banks 2 Upstream. ● P0152 - O2 Sensor 2/1 Circuit High. ● P0158 - O2 Sensor 2/2 Circuit High. ● P2504 - Charging System Output High. ● P0563 - System Voltage High. Customers may also comment on one or more of the following: ● Vehicle runs rough. ● ""Service Transmission” message on in the Instrument Panel Cluster (IPC) due to clutch slip detection with the transfer case in neutral. ● During flat tow - Transfer case mis-shift (engine running and clutch pedal up, transmission in gear). Other software enhancements included: ● Improvements to address vehicle no starts after replacing the PCM. ● O2 heater crack improvements. ● OBD software changes. This bulletin involves reprogramming the PCM with the latest available software"

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。