RAM

9100607

2025-06-14 · NHTSA 11019606

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

"MODULE Transfer Case Control If DTC C2112 is set in the DTCM module refer to complete diagnostics in Service Library, it has been seen this is primarily caused by a wiring issue. Please inspect all wiring, wiring connections and drive the vehicle in the conditions that set this fault according to the environmental data. Conduct the following test drive to recreate the condition to get the DTC to go active, - Shift from 2WD to 4HI (drive > 2 mins) - Shift from 4HI to 4LO (drive > 2 mins) - Shift from 4LO to 4HI (drive > 2 mins) - Shift from 4HI to 2WD (drive > 2 mins) Note: Inspect and confirm no corrosion present at the FAD connector If DTCM is still suspected to be at fault proceed with repair."

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。