JEEP

18-049-25 REV. A

2025-07-18 · NHTSA 11020845

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Flash: Powertrain Control Module (PCM) Updates ustomers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P08A6 - Gear Lever Position Sensor System - Multiple Sensor Correlation. ● P1129 - Closed Loop Fueling Not Achieved - Bank 2 Upstream. ● P0158 - O2 Sensor 2/2 Circuit High. ● P0152 - O2 Sensor 2/1 Circuit High. ● P2504 - Charging System Output High. ● P0563 - Battery/System Voltage High. Customers may also experience one or more of the following: ● **Vehicle goes in limp mode within 1.6 km (1 mi) of driving while in 4LO, DTC P08A6 active and "Clutch Too Hot" message followed by "Service Transmission” message in the Instrument Panel Cluster (IPC).** ● The engine runs rough This bulletin involves reprogramming the PCM with the latest available software.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。