FREIGHTLINER, MERCEDES-BENZ

LI49.20-N-076565

2025-07-23 · NHTSA 11021170

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Check engine light with fault code P300E3B in the CDI control unit CDI (N3/28) Complaint Check engine light is illuminated with fault code P300E3B “The efficiency of component 'SCR catalytic converter' is not sufficient" stored in the CDI control unit (N3/28). Cause Excessive ammonia slip is being detected in the SCR system, often triggered by IUMPR (In-Use Monitor Performance Ratio) thresholds. This typically indicates that the SCR catalyst is not converting DEF (AdBlue) efficiently under moni- tored conditions. Common Driving Scenario: •Non-dynamic driving (e.g., highway cruising with cruise control set) •Minimal load changes, steady-state exhaust flow Contributing Factors: •Software influence – IUMPR (In-Use Monitor Performance Ratio) thresholds •DEF Overdosing – Over-injection due to faulty NOx sensors, dosing valve issues, or poor DEF quality •Low Exhaust or Catalyst Temperatures – Common under low-load conditions; reduces SCR conversion efficiency •Catalyst Degradation or Contamination – Aging catalyst or contamination from oil, coolant, or poor-quality DEF Remedy IMPORTANT: Do not replace any components unless instructed through TIPS. For Model Year 2019–2021 Vehicles: •Update the following control units to the latest available software: N3/28 – Motor Electronics 'CDI61NFZ' for combustion engine 'OM642' (CDI):

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。