JEEP

18-076-25

2025-08-05 · NHTSA 11021836

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Flash: Powertrain Control Module (PCM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** ● **U0104-00 - Lost Communication With Cruise Control Module. (NA Market Only) ● U0405-00 - Invalid Data Received From Cruise Control Module. (NA Market Only)** ● P018B - Fuel Pressure Sensor "B" Circuit Range/Performance. ● P00C6 - Fuel Rail Pressure Too Low - Engine Cranking Bank 1. ● P06DD - Engine Oil Pressure Control Circuit Performance/Stuck Off. ● P0461 - Fuel Level Sensor "A" Circuit Range/Performance. ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. ● P0604-00 - Internal Control Module Random Access Memory Ram Error. ● P060C-00 - Internal Control Module Main Processor Performance. Customer may also experience one or more of the following: ● Undesirable vehicle drivability behavior causing a Shift to Park event during Engine Stop Start (ESS) while Adaptive Cruise Control (ACC) is active. ● Pressing the ACC button while ESS is active can shift the vehicle to park. ● Idle speed oscillations observed when in "Snow" and "Mud" modes. ● Poor engine performance (undershoots engine speed) for ESS and for non-ESS engine start. ● Screen two incorrectly pops up on the Instrument Cluster Panel (IPC) for five seconds during "Terrain" and "Rock" mode. ● Poor or reduced Air Conditioning (A/C) performance during wide open throttle or heavy acceleration. **In addition, the following software enhancement is available: ● Software update to prevent false DTC detection of U0104-00, U0405-00 and P018B. (NA Market Only)* This bulletin involves reprogramming the PCM with the latest available software.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。