JEEP

08-409-25

2025-12-18 · NHTSA 11026787

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Flash: Motor Control Processor B (MCP B) Updates 6B3 ustomers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P1E18-00 - Internal Control Module Electronic Park Performance. ● P1625-00 - Park Pawl System Failure. ● P1626-00 - Park Pawl Motor Stuck. NOTE: If DTCs P1E25-00, P1625-00 or P1626-00 are active, the vehicle will stay in READY mode since the Electric Vehicle Control Unit (EVCU) is not able to confirm if the park pawl is engaged, and the vehicle will be secured. ● P0A78-00 - Drive Motor A Inverter Performance. ● P0A79-00 - Drive Motor B Inverter Performance. Customers may also comment on one or more of the following: ● Vehicle is not shutting off and draining the 12V battery. ● Unable to start the vehicle This bulletin involves reprogramming the IDCM, BPCM, MCP A, MCP B and the EVCU with the latest available software and then, if needed, performing a Wheel End Disconnect Position Learn routine.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。