JEEP

9100768

2026-02-16 · NHTSA 11029689

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

If the Power Liftgate (PLG) does not operate following battery drainage or when DTCs B2199-16 or B21DD-16 are active, perform the following steps: 1. Verify Battery Voltage: Ensure battery voltage is at nominal value (minimum 12.5 V). Charge the battery, if necessary before proceeding. 2. Confirm Low Voltage DTCs: After charging, verify that any low battery voltage DTCs are stored. 3. Check PLGM Proxi Alignment: 4. If PLGM is not aligned: - Perform Proxi Alignment - Reset the module - Perform module recalibration. 5. If Proxi Is Correct: - Reset the module. - Perform module calibration. 6. Diagnose Active DTCs 7. Inspect wiring and related components associated with those DTCs. Repair as necessary and clear DTCs. 8. Module Replacement: If the module does not accept Proxi alignment, Module reset, or Calibration.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。