MERCEDES-BENZ

LI07.70-P-080607

2026-06-03 · NHTSA 11033386

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Complaint Check engine light activated. Fault codes related to misfire on multiple cylinders stored. Possible fault codes listed below: P030004 - Combustion misfiring has been detected. There is an internal fault. P030100 - Combustion misfiring of cylinder 1 has been detected P030200 - Combustion misfiring of cylinder 2 has been detected P030300 - Combustion misfiring of cylinder 3 has been detected P030400 - Combustion misfiring of cylinder 4 has been detected P030500 - Combustion misfiring of cylinder 5 has been detected P030600 - Combustion misfiring of cylinder 6 has been detected P031600 - Combustion misfires were detected at engine start. Cause Under analysis Remedy Note: If the vehicle has a single cylinder misfiring or a constant misfire, diagnose the cause of this separately. This LI document is not relevant in this scenario. Collect details from the vehicle owner: • What did the driver experience/feel when the CEL activated? • What is the driving scenario when the symptom occurs? (i.e. time of day, vehicle speed, electric driving/ICE driving, etc.) • How often has this symptom been experienced? • How often is the vehicle recharged and driven in electric mode? • When was the last time the fuel tank was refueled, brand, quality of fuel? Save document from the vehicle: • Initial quick test with freeze frame data • Control unit log from Engine control unit N3/10 • Control unit log from Powertrain control unit N127 • HV system control unit log Additional steps: 1. Perform test drive and attempt to reproduce symptom as described by owner 2. Capture a fuel sample and check for abnormal condition or ethanol content 3. Create a TIPS case with the powertrain team and include all above information/documents and any additional observations.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。