MERCEDES-BENZ

LI54.30-P-080709

2026-09-05 · NHTSA 11037729

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Complaint Display message in the instrument cluster for "Active Brake Assist Inoperative" or "DISTRONIC inoperative". AND Fault code C1100FC or C1100FD is Active or Active and Stored in MRR_F_Gen6 (B29/20). Cause The holder for the MRR_F_Gen6 (B29/20) front radar sensor may no longer have the correct alignment (angular position). Remedy Confirm whether the instrument cluster message was already present upon receipt of the vehicle by the end customer. Check if DTC mileage was present prior to vehicle PDI/Sale of vehicle. In this case, submit under warranty with the specified SSL. If vehicle exhibited the instrument cluster message AND DTC mileage was AFTER customer hand‐over, cost settlement under warranty is not possible as it is due to outside damages. Note: Additionally, it is possible to obtain a timestamp for a possible collision, including the date, if the end customer has purchased the "Parking and Collision Alert" digital service. In both cases, the front radar holder must be replaced. After replacing the radar holder, perform calibration in IDC_Gen6 (N62/5).

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。