RAM

18-075-26 REV. A

2026-10-03 · NHTSA 11038313

車型關聯可作查閱線索；引擎、生產範圍與軟體條件請核對原廠資料。

原廠摘要

以下為英文原文

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0111-00 - Intake Air Temperature Sensor 1 Circuit Performance (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High (In Active or Stored status) ● P062B-00 - Internal Control Module Fuel Injector Control Performance ● P0E7E-00 - Coolant Bypass Valve B Control Circuit (In Active or Stored status) ● P2AF6-00 - Starter Relay 3 Stuck Off (with PCR). ● P00FD - Battery B State Of Charge Performance. ● P013F-00 - O2 Sensor 2/1 Delayed Response - Lean To Rich Bank. (In Active or Stored status) ● P014A-00 - O2 Sensor 2/2 Delayed Response - Rich to Lean Bank. (In Active or Stored status) ● P013E-00 - O2 Sensor 2/1 Delayed Response - Rich to Lean Bank. (In Active or Stored status) ● P014B-00 - O2 Sensor 2/2 Delayed Response - Lean To Rich Bank. (In Active or Stored status) ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off.(In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. (In Active or Stored status) ● P1CEA-00 - Boost Side EVAP Purge System Performance. (In Active or Stored status) ● P05BD-00 - Stop-Start Mode Switch Range/Performance. (In Active or Stored status) ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. (In Active or Stored status) ● U0673-00 - Lost Communication With Ion Sense Module. (In Active or Stored status) Customers may also comment on one or more of the following: ● High Elevation misfire. Electronic Start Stop (ESS) inoperative or "Auto Stop/Start Not Ready" message displayed in the Instrument Panel Cluster (IPC). NOTE: **Normal Auto Stop/Start inhibit conditions should not be considered the cause of this concern. The condition is associated with DTC P2AF6.** ● "Door Ajar" message on when door is closed. ● BSCM MIL illumination request not setting the MIL in the PCM High oil level indicator illuminated on the IPC. **The following software enhancements are now available: ● Improvements to prevent misfire DTCs P0300-P0306 that may set if one of the following DTCs set: ○ P0335-00 - Crankshaft Position Sensor Circuit. ○ P0336-00 - Crankshaft Position Sensor Performance.** This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.

僅在原廠、通報編號、發布日期和完整摘要一致時，才合併重複登錄，並保留原始編號。舊資料仍可查閱；確認明確取代關係後才標示後續版本。1994 年以前的車輛關聯與預設結果分開顯示；未註明年式不等於所有年式適用。