P0171 · 原廠技術資料

CADILLAC · 2015-03-26

This preliminary informational bulletin provides repair information for a customer concern that the Malfunction Indicator Lamp (MIL) is illuminated, and technicians may find DTC P0171 set.

RAM · 2015-03-14

Flash: 3.0L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. It also involves replacement of the Oxygen (O2) Sensor and cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 if necessary depending on Diagnostic Trouble Codes (DTC) that may have set. A small number of customers may experience an intermittent engine shudder or vibration which may not set a Diagnostic Trouble Code (DTC). In addition other customers may experience a Malfunction Indicator Lamp (MIL) illumination upon which the technician may find one or more of the following DTCs have been set: ? P20C2 - Reductant Heater 3 Control Circuit Performance. ? P204F - Reductant System Performance. ? P20E9 -…

JEEP · 2015-03-14

Flash: 3.0 L MIL Illumination Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one or more of the following Diagnostic Trouble Code(s) may have been set: ? P20C2 - Reductant Heater 3 Control Circuit Performance. ? P204F - Reductant System Performance. ? P20E9 - Reductant Pressure Too High. ? P0087-00 - Fuel Rail Pressure Too Low. ? P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. ? P0171-00 - System Too Lean (Bank 1). ? P0172-00 - System Too Rich (Bank 1). ? P225C-00 - NOX Sensor Performance - Signal Stuck High Bank 1 Sensor 1. ? P225D-00 -…

CHEVROLET, GMC · 2015-03-10

This preliminary informational bulletin provides diagnostic tips for a customer concern of Malfunction Indicator Lamp (MIL) intermittently illuminated, and technicians finding DTCs P013B, P013D, P167E, P0171 or P0174 set.

INFINITI · 2015-01-20

IF YOU CONFIRM: The MIL is ON after the engine has been idling a while and one or both of the following DTCs are found stored in the ECM: - P0171 (FUEL SYS-LEAN-B1) - P0174 (FUEL SYS-LEAN-B2) ACTION: 1. Confirm this bulletin applies. - Compare the vehicle?s current ECM part number to those listed in Table A (see page 5). 2. If the ECM part number does not match one listed in Table A, this bulletin does not apply. Go back to ASIST for further diagnostic and repair information. 3. If this bulletin applies, reprogram the ECM. See this bulletin for further detail.

JEEP · 2014-12-19

Flash: 3.0 L MIL Illumination Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one or more of the following Diagnostic P0087-00 - Fuel Rail Pressure Too Low. P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. P0171-00 - System Too Lean (Bank 1). P0172-00 - System Too Rich (Bank 1). P225C-00 - NOX Sensor Performance - Signal Stuck High Bank 1 Sensor 1. P225D-00 - NOX Sensor 1/1 Performance - Signal Stuck Low. P1288-00 - NOX Sensor 1/2 Zero Offset Too High. P1289-00 - NOX Sensor 1/2 Zero Offset Too Low. P1296-00 - EGR Slow Response - Increasing…

JEEP · 2014-12-19

Flash: 3.0 L MIL Illumination Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one or more of the following Diagnostic Trouble Code(s) may have been set: P0087-00 - Fuel Rail Pressure Too Low. P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. P0171-00 - System Too Lean (Bank 1). P0172-00 - System Too Rich (Bank 1). P225C-00 - NOX Sensor Performance - Signal Stuck High Bank 1 Sensor 1. P225D-00 - NOX Sensor 1/1 Performance - Signal Stuck Low. P1288-00 - NOX Sensor 1/2 Zero Offset Too High. P1289-00 - NOX Sensor 1/2 Zero Offset Too Low.…

RAM · 2014-12-18

Flash: MIL Illumination - Diagnostic and System Improvements Bulletin involves reprogramming the Powertrain Control Module (PCM) with latest available software. It also involves replacement of the Oxygen (O2) Sensor and cleaning or replacement of Exhaust Gas Temperature (EGT) Sensor 1/2 if necessary, depending on Diagnostic Trouble Codes (DTC) that may have set. A small number of customers may experience an intermittent engine shudder or vibration which may not set a Diagnostic Trouble Code (DTC) other customers may experience a Malfunction Indicator Lamp (MIL) illumination upon which technician may find one or more of following DTCs have been set: P016A-00 - Excessive Time To Enter Closed Loop Air/Fuel Ratio Control. P2459-00 - Diesel Particulate Filter Regeneration Frequency. P0133-00 -…

RAM · 2014-12-18

Flash: MIL Illumination - Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. It also involves replacement of the Oxygen (O2) Sensor and cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 if necessary depending on Diagnostic Trouble Codes (DTC) that may have set. A small number of customers may experience an intermittent engine shudder or vibration which may not set a Diagnostic Trouble Code (DTC). In addition other customers may experience a Malfunction Indicator Lamp (MIL) illumination upon which the technician may find one or more of the following DTCs have been set: P016A-00 - Excessive Time To Enter Closed Loop Air/Fuel Ratio Control. P2459-00 - Diesel Particulate Filter…

TOYOTA · 2014-12-11

TSB: Some 2012 ? 2015 model year Sequoia and Tundra vehicles with the 3UR-FBE engine may exhibit a MIL ?ON? condition with Diagnostic Trouble Codes (DTCs) P0171/P0174 (System too Lean Bank 1/Bank 2), P0172/P0175 (System too Rich Bank 1/Bank 2), P1604 (Startability Malfunction), and/or P1605 (Rough Idling) after attempting to start the engine. Alcohol Density Estimate values may be high even though the vehicle was fueled with regular fuel (E0/E10). The Engine Control Module/ECM (SAE term: Powertrain Control Module/PCM) logic has been modified to address this condition. Use the following Repair Procedure to reprogram the ECM (PCM). ©

TOYOTA · 2014-12-11

TSB: Some 2012 ? 2015 model year Sequoia and Tundra vehicles with the 3UR-FBE engine may exhibit a MIL ?ON? condition with Diagnostic Trouble Codes (DTCs) P0171/P0174 (System too Lean Bank 1/ Bank 2), P0172/P0175 (System too Rich Bank 1/Bank 2), P1604 (Startability Malfunction), and/or P1605 (Rough Idling) after attempting to start the engine. Alcohol Density Estimate values may be high even though the vehicle was fueled with regular fuel (E0/E10). The Engine Control Module/ECM (SAE term: Powertrain Control Module/PCM) logic has been modified to address this condition. Use the following Repair Procedure to reprogram the ECM (PCM). ©

CHEVROLET · 2014-11-13

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp, rough running, and/or lack of power. Technician may find Diagnostic Trouble Codes P0101, P0171, P0172, P0174, and/or P0175 set. Technician will need to inspect the hydrocarbon absorber pad that is on the inside of the air cleaner lid to ensure that it is properly secured to the lid. If the hydrocarbon absorber pad is found loose, technician will need to replace the air cleaner lid.

BUICK, CHEVROLET · 2014-10-31

This Preliminary Information communication provides information to the technician about vehicles that may have a Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Codes P0171 and or P1101 set. Technician will need to inspect the Air Cleaner Housing Identification Code. If the Hydro Carbon Absorber is missing, or the Identification code is other than ACD, replace the Air Cleaner Housing with the latest listing in the Electronic Parts Catalog.

JEEP · 2014-10-17

Flash: MIL Illumination Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one or more of the following Diagnostic Trouble Code(s) may have been set erroneously: ? P0087-00 - Fuel Rail Pressure Too Low. ? P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. ? P0171-00 - System Too Lean (Bank 1). ? P0172-00 - System Too Rich (Bank 1). ? P225C-00 - NOX Sensor Performance - Signal Stuck High Bank 1 Sensor 1. ? P225D-00 - NOX Sensor 1/1 Performance - Signal Stuck Low. ? P1288-00 - NOX Sensor 1/2 Zero Offset Too High. ? P1289-00 - NOX Sensor 1/2…

RAM · 2014-10-10

Flash: MIL Illumination - Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. It also involves replacement of the Oxygen (O2) Sensor and cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 if necessary depending on codes that have set. A small number of customers may experience an intermittent engine shudder or vibration which may not set a Diagnostic Trouble Code (DTC). In addition other customers may experience a Malfunction Indicator Lamp (MIL) illumination upon which the technician may find one or more of the following DTCs have been set: ? P2459-00 - Diesel Particulate Filter Regeneration Frequency. ? P0133-00 - O2 Sensor 1/1 Slow Response. ? P2084-00 - Exhaust Gas…

RAM · 2014-10-07

Flash: MIL Illumination - Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. It also involves replacement of the Oxygen (O2) Sensor and cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 if necessary depending on codes that have set. A small number of customers may experience an intermittent engine shudder or vibration which may not set a Diagnostic Trouble Code (DTC). In addition other customers may experience a Malfunction Indicator Lamp (MIL) illumination upon which the technician may find one or more of the following DTCs have been set: ? P2459-00 - Diesel Particulate Filter Regeneration Frequency. ? P0133-00 - O2 Sensor 1/1 Slow Response. ? P2084-00 - Exhaust Gas…

CHEVROLET, GMC · 2014-09-24

This Preliminary Information communication provides information to the technician about vehicles that may have Service Engine Soon Malfunction Indicator Lamp on. Technician will find Diagnostic Trouble Codes P0171 and P0174. Technician will need to check the ethanol content of the fuel with the J44175. If the fuel tested over 10% alcohol, determine if the vehicle is equipped with Regular Production Option Code (FHS), If not flush the fuel system and add E10 gas.

BUICK, CHEVROLET, GMC · 2014-07-10

This Preliminary Information communication provides information to the technician about a service engine soon light on. Technician will find diagnostic trouble codes P0089 and P228D set in the engine control module. This concern could be due to an incorrect intake camshaft or camshaft actuator sprocket. A diagnostic trouble code of P0171 could also set from installing incorrect injectors.

BUICK, CHEVROLET, GMC · 2014-07-08

This Preliminary Information communication provides information to the technician about a service engine soon light on. Technician will find diagnostic trouble codes P0089 and P228D set in the engine control module. This concern could be due to an incorrect intake camshaft or camshaft actuator sprocket. A diagnostic trouble code of P0171 could also set from installing incorrect injectors.

AUDI · 2013-06-21

Supersedes Technical Service Bulletin Group 00 number 10-01 dated February 5, 2010. Excessive accumulation of deposits on intake valves, intake manifold, fuel injectors and combustion chambers. Engine runs rough after cold start. Excessive engine cranking time. Hesitations while driving. Rough engine idle. Reduced engine performance. Poor fuel economy. Conditions may be severe enough to illuminate the MIL in conjunction with storage of DTCs for misfire (example: P0300, P030x) and / or lean fuel system (example: P0171, P0174, P1128, P1130, P1136, P1138) in the engine control module (ECM). Condition may be caused by use of contaminated gasoline. Condition may be caused by use of gasoline with a low content of deposit control additives.

TOYOTA · 2013-06-06

Some 2012 ? 2013 model year Sequoia and Tundra vehicles with the 3UR-FBE engine may exhibit a MIL ?ON? condition with Diagnostic Trouble Codes (DTCs) P0171/P0174 (System too Lean Bank 1/ Bank 2), P0172/P0175 (System too Rich Bank 1/Bank 2), P1604 (Startability Malfunction), and/or P1605 (Rough Idling) after attempting to start the engine. Alcohol Density Estimate values may be high even though the vehicle was fueled with regular fuel (E0/E10). The Engine Control Module/ECM (SAE term: Powertrain Control Module/PCM) logic has been modified to address this condition. Use the following Repair Procedure to reprogram the ECM (PCM).

TOYOTA · 2013-04-26

Some 2012-2013 model year Sequoia and Tundra vehicles with the 3UR-FBE engine may exhibit a MIL "ON" condition with DTC P0171/P0174 (lean), P0172/P0175 (rich), P1604 Startability, and/or P1605 Rough Idle after attempting to start the engine.

LAND ROVER · 2013-04-08

The in-line fuel filters in the fuel delivery modules of 2002 - 2005 model year Land Rover Freelander vehicles may be manufactured away from specification. The filters may cointain an uncontrolled amount of adhesive used to bond the filer paper to the filter casing; the adhesive may not have been adequate dimensional controls. In any of these cases, it is possible for these coinditions to prevent adequate fuel flow through eifther restrictions in the filter or cracking of the pump stub pipe. This may lead to increased fuel pump motors use to maintain the required engine demanded fulel and premature wear of the motor brushes. In the event of restricted fuel flow, the vehicle may suffer one or more of the following symptoms: rough running and malfunction indicator lamp (MIL) illumination ;…

CADILLAC · 2013-04-01

GM: THE MALFUNCTION INDICATOR LAMP LIGHT IS ON AND MAY BE PAIRED WITH DTC P0171. *JS

BUICK · 2013-03-18

This preliminary information bulletin provides a procedure to inspect and tighten the clamps on the air duct due to the (SES) light on with DTCs P0171, P1101, and/or P0101 being set.

CHEVROLET · 2013-03-04

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp, rough running, and/or lack of power. Technician may find Diagnostic Trouble Codes P0101, P0171, P0172, P0174, and/or P0175 set. Technician will need to inspect the hydrocarbon absorber pad that is on the inside of the air cleaner lid to ensure that it is properly secured to the lid. If the hydrocarbon absorber pad is found loose, technician will need to replace the air cleaner lid.

BUICK · 2013-03-01

GM: SERVICE ENGINE SOON LIGHT TURNS ON PAIRED WITH DTCS P0171, P1101, AND/OR P0101 SET. *JS

INFINITI · 2013-01-02

IF YOU CONFIRM: Any of the following DTCs are stored in the ECM: - P0031 / P0051, P0032 / P0052, P0130 / P0150, P0133 / P0153, P2A00 / P2A03, P1148 / P1168 OR Any of the following DTCs are stored in the ECM as a result of one of the A/F sensors: - P0300 - P0308, P0171 / P0174, P0172 / P0175 ACTION: 1. Replace the A/F sensor that relates to the stored DTC(s) (B1 and/or B2). 2. Refer to step 7 in the SERVICE PROCEDURE to confirm if ECM reprogramming applies. 3. If it applies, reprogram the ECM. See this bulletin for further detail.

BUICK, CHEVROLET, GMC · 2012-12-05

This Preliminary Information communication provides information to the technician about vehicles that may have a Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Code P01285 and or P0171. Technician will need to use published Service Information diagnostics first. Technician will update the Engine Control Module with the latest calibration in Tis-2-Web if published Service Information diagnostics do not resolve the concern. If the calibration did not repair the concern inspect the engine for oil leaks and insure the oil fill cap is properly closed. Technician will also use the CH-44175-1 handheld tester to test the ethanol content of the fuel. Technician should also inspect for unmetered air/vacuum leaks by using the Evaporative Emissions System smoke machine to…

BUICK, CHEVROLET, GMC · 2012-11-05

This Preliminary Information communication provides information to the technician about vehicles that may have a Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Code P01285 and or P0171. Technician will need to use published Service Information diagnostics first. Technician will update the Engine Control Module with the latest calibration in Tis-2-Web if published Service Information diagnostics do not resolve the concern. If the calibration did not repair the concern inspect the engine for oil leaks and insure the oil fill cap is properly closed. Technician will also use the CH-44175-1 handheld tester to test the ethanol content of the fuel. Technician should also inspect for unmetered air/vacuum leaks by using the Evaporative Emissions System smoke machine to…