P032F · 原廠技術資料

DODGE · 2026-10-03

Flash: Powertrain Control Module (PCM) Updates PCR9A Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P032F-00 - Combustion Engine Producing Insufficient Torque. ● P2D28-00 - Cold Start Propulsion Torque Performance. ● U0075-00 - Control Module Communication Bus "C" Off. ● P0610-00 - Control Module Vehicle Options Error. ● P0630-00 - VIN Not Programmed or Incompatible - ECM/PCM. ● P0607-00 - Control Module Performance. ● P0513-00 - Incorrect Immobilizer Key. ● C0501-00 - Left Front Wheel Speed Sensor "A" Range/Performance. ● C0507-00 - Right Front Wheel Speed Sensor "A" Range/Performance. ● C050D-00 - Left Rear Wheel Speed Sensor "A" Range/Performance. ●…

RAM · 2026-07-29

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle exhibit/set SYMPTOM: one or more of the following Diagnostic Trouble Codes (DTCs): ● P219A - Bank 1 Air-Fuel Ratio Imbalance. ● P219B - Bank 2 Air-fuel Ratio Imbalance. ● P032F - Combustion Engine Producing Insufficient Torque. NOTE: This revision has an updated and more effective fix for DTC P219B than the prior version. Customers may experience one or more of the following: ● **Power Take Off (PTO) may cancel during engagement with high PTO loads.** ● Engine speed surging, unstable, hunting, or oscillating while coasting at low vehicle speeds. ● Stationary Idle PTO feature is not activating when the user configuration is selected to require parking…

RAM · 2026-04-22

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0088-00 - Fuel Rail Pressure Too High - Bank 1.** ● P20CF-00 - Exhaust After treatment Fuel Injector "A" Stuck Open. ● P20DB-00 - Exhaust After treatment Fuel Supply Control Stuck Open. ● U0109-00 - Lost Communication With Fuel Pump Control Module. ● P1451-00 - Diesel Particulate Filter System Performance. ● P2463-00 - Diesel Particulate Filter Restriction - Soot Accumulation Bank 1. ● P2459-00 - Diesel Particulate Filter Regeneration Too Frequent. ● P0087-00 - Fuel Rail Pressure Too Low. ● P2540-00 - Low Pressure Fuel System Sensor Circuit Range/performance. ● P2543-00 -…

RAM · 2026-03-10

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle exhibit/set **one or more of the following Diagnostic Trouble Codes (DTCs)**: ● **P219A - Bank 1 Air-Fuel Ratio Imbalance. ● P219B - Bank 2 Air-fuel Ratio Imbalance.** ● P032F - Combustion Engine Producing Insufficient Torque. Customers may experience one or more of the following: ● **Engine speed surging, unstable, hunting, or oscillating while coasting at low vehicle speeds. ● Stationary Idle Power Take off (PTO) feature is not activating when the user configuration is selected to require parking brake be set (DD/DP Only). ● PTO not auto-resuming after hard-wired remote start (DD/DP Only).** ● Driveline clunk or bump when coasting to a stop **in cruise…

RAM · 2026-03-10

Technical Service Bulletin (TSB) Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle exhibit/set **one or more of the following Diagnostic Trouble Codes (DTCs)**: ● **P219A - Bank 1 Air-Fuel Ratio Imbalance. ● P219B - Bank 2 Air-fuel Ratio Imbalance.** ● P032F - Combustion Engine Producing Insufficient Torque. Customers may experience one or more of the following: ● **Engine speed surging, unstable, hunting, or oscillating while coasting at low vehicle speeds. ● Stationary Idle Power Take off (PTO) feature is not activating when the user configuration is selected to require parking brake be set (DD/DP Only). ● PTO not auto-resuming after hard-wired remote start (DD/DP Only).** ● Driveline clunk or bump…

RAM · 2025-10-08

Flash: Powertrain Control Module (PCM) Updates *Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0087-00 - Fuel Rail Pressure Too Low. ● P2540-00 - Low Pressure Fuel System Sensor Circuit Range/performance. ● P2543-00 - Low Pressure Fuel System Sensor Circuit Intermittent. ● P214D-00 - SCR NOX Catalyst Outlet Temperature Too High During Particulate Filter Regeneration. ● P242B-00 - Exhaust Gas Temperature Sensor Circuit Performance - Bank 1 Sensor 3. ● P24DA-00 - Particulate Matter Sensor Exhaust Sample Error Bank 1. ● P20EE-00 - SCR Nox Catalyst Efficiency Below Threshold - Bank 1 Catalyst 1. ● P226C-00 - Turbocharger Boost Control "A" Slow Response. ● P2281-00 - Air…

RAM · 2025-09-30

Flash: Powertrain Control Module (PCM) Updates *Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** ● **P0263 - 00 Cylinder 1 Contribution/balance. ● P0266 - 00 Cylinder 2 Contribution-balance. ● P0269 - 00 Cylinder 3 Contribution/balance. ● P0272 - 00 Cylinder 4 Contribution/balance. ● P0275 - 00 Cylinder 5 Contribution/balance. ● P0278 - 00 Cylinder 6 Contribution/balance. ● P026B - 00 Injection Timing Performance. ● P020A - 00 Cylinder 1 Injection Timing. ● P020B - 00 Cylinder 2 Injection Timing. ● P020C - 00 Cylinder 3 Injection Timing. ● P020D - 00 Cylinder 4 Injection Timing. ● P020E - 00 Cylinder 5 Injection Timing. ● P020F - 00 Cylinder 6 Injection Timing. ● P06B9…

FORD · 2025-09-24

Some of the vehicles listed in the Model statement above may exhibit an incorrectly illuminated malfunction indicator lamp (MIL) and an illuminated powertrain malfunction (wrench) indicator with a reduced engine power condition and diagnostic trouble code (DTC) P1061 and/or P032F stored in the powertrain control module (PCM). This may be due to the software in the PCM.

RAM · 2025-07-04

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P032F - Combustion Engine Producing Insufficient Torque. Customers may also experience one or more of the following: ● Driveline clunk or bump when coasting to a stop. ● Engine idle undershoot or delayed response with power steering input. This bulletin involves reprogramming the PCM with the latest available software.

RAM · 2025-07-04

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P032F - Combustion Engine Producing Insufficient Torque. Customers may also experience one or more of the following: ● Driveline clunk or bump when coasting to a stop. ● Engine idle undershoot or delayed response with power steering input This bulletin involves reprogramming the PCM with the latest available software.

RAM · 2025-07-04

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P032F - Combustion Engine Producing Insufficient Torque. Customers may also experience one or more of the following: ● Driveline clunk or bump when coasting to a stop. ● Engine idle undershoot or delayed response with power steering input. This bulletin involves reprogramming the PCM with the latest available software.

RAM · 2025-07-04

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P032F - Combustion Engine Producing Insufficient Torque. Customers may also experience one or more of the following: ● Driveline clunk or bump when coasting to a stop. ● Engine idle undershoot or delayed response with power steering input This bulletin involves reprogramming the PCM with the latest available software.

RAM · 2025-07-04

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● P032F - Combustion Engine Producing Insufficient Torque. Customers may experience one or more of the following: ● Driveline clunk or bump when coasting to a stop. ● Engine idle undershoot or delayed response with power steering input. This bulletin involves reprogramming the PCM with the latest available software.

RAM · 2025-05-15

"Flash: Powertrain Control Module (PCM) Updates Customers may comment on one or more of the following: ● Malfunction Indicator Lamp (MIL) or check engine light illuminated. ● Cruise control drops out/cancels on its own. ● Engine stumble, runs rough, or a slight lack of power. The following software enhancements are also available: ● Reduce the occurrence of false faults Diagnostic Trouble Codes (DTCs) P0300 and P0315. ● DTC P1451 re-tune to reduce false faults. ● Improvements to allow DTC P2509 faults to be cleared with wiTECH. ● Adaptive Cruise Control (ACC) software fix to prevent cruise control dropouts. ● Engine stumble fix for improved drivability. ● Engine stall detection allowing DTC P032F to clear after a power cycle. ● Allow multiple PROXI rewrites. ● Enable cold re-prime (DTC…

RAM · 2025-05-15

"Flash: Powertrain Control Module (PCM) Updates Customers may comment on one or more of the following: ● Malfunction Indicator Lamp (MIL) or check engine light illuminated. ● Cruise control drops out/cancels on its own. ● Engine stumble, runs rough, or a slight lack of power. The following software enhancements are also available: ● Reduce the occurrence of false faults Diagnostic Trouble Codes (DTCs) P0300 and P0315. ● DTC P1451 re-tune to reduce false faults. ● Improvements to allow DTC P2509 faults to be cleared with wiTECH. ● Adaptive Cruise Control (ACC) software fix to prevent cruise control dropouts. ● Engine stumble fix for improved drivability ● Engine stall detection allowing DTC P032F to clear after a power cycle. ● Allow multiple PROXI rewrites. ● Enable cold re-prime (DTC…

RAM · 2025-04-17

"Flash: Powertrain Control Module (PCM) Updates Customers may comment on one or more of the following: ● Malfunction Indicator Lamp (MIL) or check engine light illuminated. ● Cruise control drops out/cancels on its own. ● Engine stumble, runs rough, or a slight lack of power. The following software enhancements are also available: ● Reduce the occurrence of false faults DTCs P0300 and P0315. ● DTC P1451 retune to reduce false faults. ● Improvements to allow DTC P2509 faults to be cleared with wiTECH. ● Adaptive Cruise Control (ACC) software fix to prevent cruise control dropouts. ● Engine stumble fix for improved drivability ● Engine stall detection allowing DTC P032F to clear after a power cycle. ● Allow multiple PROXI rewrites. ● Enable cold reprime (DTC P208B improvement). This…

RAM · 2025-04-17

"Flash: Powertrain Control Module (PCM) Updates Customers may comment on one or more of the following: ● Malfunction Indicator Lamp (MIL) or check engine light illuminated. ● Cruise control drops out/cancels on its own. ● Engine stumble, runs rough, or a slight lack of power. The following software enhancements are also available: ● Reduce the occurrence of false faults DTCs P0300 and P0315. ● DTC P1451 retune to reduce false faults. ● Improvements to allow DTC P2509 faults to be cleared with wiTECH. ● Adaptive Cruise Control (ACC) software fix to prevent cruise control dropouts. ● Engine stumble fix for improved drivability ● Engine stall detection allowing DTC P032F to clear after a power cycle. ● Allow multiple PROXI rewrites. ● Enable cold reprime (DTC P208B improvement). This…

FORD, LINCOLN · 2024-09-03

In some of the affected vehicles, after safety recall 23S27 has been performed, the Malfunction Indicator Light (MIL) may illuminate and store Diagnostic Trouble Codes (DTCs) P1061 and/or P032F. This could be due to a faulty connecting rod bearing that was detected by the Powertrain Control Module (PCM). Reason for supplement: labor allowances/program term updates

FORD, LINCOLN · 2024-06-25

Certain 2021-2022 Model Year Corsair, 2020-2022 Model Year Escape and 2022-2023 Model Year Maverick Vehicles Equipped With 2.5L HEV/PHEV Engine Long Block Replacement In some of the affected vehicles, after safety recall 23S27 has been performed, the Malfunction Indicator Light (MIL) may illuminate and store Diagnostic Trouble Codes (DTCs) P1061 and/or P032F. This could be due to a faulty connecting rod bearing that was detected by the Powertrain Control Module (PCM).

JEEP · 2021-11-05

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set:P032F - Combustion Engine Producing Insufficient Torque.

JEEP · 2021-11-05

Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set:P032F - Combustion Engine Producing Insufficient Torque. Customers may also experience a shift quality issue during a 5-4 downshift.

JEEP · 2021-08-04

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set: P032F - Combustion Engine Producing Insufficient Torque.

JEEP · 2021-08-04

Flash: Transmission Control Module (TCM) Updates This bulletin involves reprogramming the TCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC) has been set: P032F - Combustion Engine Producing Insufficient Torque. Customers may also experience a shift quality issue during a 5-4 downshift.

JEEP · 2021-07-17

Customer complaint may include engine stalled/Mil lamp on. Upon further investigation, if DTC P032F is stored in the PCM, a stall has occurred. If P032F DTC is not present but the customer complained of a ?Shift to Park? message in the EVIC, an issue may exist even if the engine did not stall.