P16F3 · 原廠技術資料

CHEVROLET, GMC · 2023-08-10

This technical bulletin provides repair information to correct a customer concern of Service Engine Soon Lamp being illuminated. They may also comment on multiple transmission issues including harsh or delayed shifts, slip, surge, shudder, noise, whine, growl, shake and/or vibration. As well as the exhaust brake not working or that they do not feel it. Technicians may find DTCs P2002, P2463, P2459, P144E, P0421, P0422, P0106 P20EE, P129F, P16F3, P20FF, P226D, P249D, P249E, P11CC and / or P11D5.

CHEVROLET · 2022-10-19

This service bulletin provides a procedure to correct the condition of Service Engine Soon Light/Message with DTCs P16F3 and/or P060C in the ECM.

CHEVROLET, GMC · 2022-04-01

This technical bulletin provides repair information to correct a customer concern of Service Engine Soon Lamp being illuminated with DTCs P2002, P2463, P2459, P144E, P0421, P0422, P0106 P20EE, P129F, P16F3, P20FF, P226D, P249D, P249E, P11CC and / or P11D5. They may also comment on multiple transmission issues including harsh or delayed shifts, slip, surge, shudder, noise, whine, growl, shake and/or vibration.

CHEVROLET, GMC · 2022-02-16

This technical bulletin provides repair information to correct a customer concern of Service Engine Soon Lamp being illuminated. They may also comment on multiple transmission issues including harsh or delayed shifts, slip, surge, shudder, noise, whine, growl, shake and/or vibration. As well as the exhaust brake not working or that they do not feel it. Technicians may find DTCs P2002, P2463, P2459, P144E, P0421, P0422, P0106 P20EE, P129F, P16F3, P20FF, P226D, P249D, P249E, P11CC and / or P11D5.

CHEVROLET, GMC · 2021-05-13

This technical bulletin provides repair information to correct a customer concern of MIL Illuminated with DTC?P16F3 Set.

CHEVROLET, GMC · 2020-02-14

Service Update - On vehicles that are equipped with a 6.6L diesel engine, may have one or more of the following conditions exist: 1. The instrument panel cluster may incorrectly display the message ?DEF Low? when a diesel exhaust fluid (DEF) controller internal fault is detected (DTC P20FF), instead of displaying the proper ?Service DEF System? message. 2. The customer may complain of excessive engine fan noise at a low vehicle speed. 3. Under certain conditions, the diagnostic system may set one of the following DTC?s when there is no problem with a component: (P20EE, P226D, P16F3 and P129F). Dealers are to reprogram the engine control module and perform NOx and Catalyst Resets and Regen Enable.

CHEVROLET, GMC · 2019-12-02

N192266750-01 - Service Update (Revised Warranty Information and Service Procedure). On certain vehicles that are equipped with a 6.6L diesel engine, may have one or more of the following conditions exist: 1.The instrument panel cluster may incorrectly display the message ?DEF Low? when a diesel engine fluid (DEF) controller internal fault is detected (DTC P20FF), instead of displaying the proper ?Service DEF System? message. 2.The customer may complain of excessive engine fan noise at a low vehicle speed. 3.Under certain conditions, the diagnostic system may set one of the following DTC?s when there is no problem with a component: (P20EE, P226D, P16F3 and P129F). Dealers are to reprogram the engine control module.

CHEVROLET, GMC · 2019-10-08

N192266751 - Service Update (9 VINs moved from N192266750 due to different procedure). On certain vehicles that are equipped with a 6.6L diesel engine, may have one or more of the following conditions exist: 1.The instrument panel cluster may incorrectly display the message ?DEF Low? when a diesel engine fluid (DEF) controller internal fault is detected (DTC P20FF), instead of displaying the proper ?Service DEF System? message. 2.The customer may complain of excessive engine fan noise at a low vehicle speed. 3.Under certain conditions, the diagnostic system may set one of the following DTC?s when there is no problem with a component: (P20EE, P226D, P16F3 and P129F). Dealers are to reprogram the engine control module.

CHEVROLET, GMC · 2019-10-01

N192266750 - Service Update. On certain vehicles that are equipped with a 6.6L diesel engine, may have one or more of the following conditions exist: 1.The instrument panel cluster may incorrectly display the message ?DEF Low? when a diesel engine fluid (DEF) controller internal fault is detected (DTC P20FF), instead of displaying the proper ?Service DEF System? message. 2.The customer may complain of excessive engine fan noise at a low vehicle speed. 3.Under certain conditions, the diagnostic system may set one of the following DTC?s when there is no problem with a component: (P20EE, P226D, P16F3 and P129F). Dealers are to reprogram the engine control module.

CHEVROLET, GMC · 2019-09-27

This Preliminary information communicates to the dealer technician to check for any new ECM calibration updates for DTCs P129F P16F3 P20EE P20FF P226D P249D P249E P11CC and / or P11D5 set.

CADILLAC, CHEVROLET, GMC · 2019-02-19

This technical bulletin provides repair information for transmission control module reprogramming to correct a customer concern for MIL illuminated with firm shifts, shudder, engine RPM flare and DTCs P0606, P16F3 or P2818 set.

CADILLAC, CHEVROLET, GMC · 2018-11-02

This Preliminary information communicates to the dealer an issue where the vehicle's service engine soon light may illuminate due to trouble codes P0601-P0604, P0606, P062B, P062F, P0630, P16F3, or P262B . The dealer is to inspect the engine control module's electrical connections and for proper powers and grounds. Dealer instructed to replace the Engine Control Module, if no other issues found.

CHEVROLET, GMC · 2016-06-28

THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ABOUT VEHICLES THAT MAY HAVE A SERVICE ENGINE SOON MALFUNCTION INDICATOR LAMP AND DIAGNOSTIC TROUBLE CODE P16F3 SET IN THE ENGINE CONTROL MODULE. IF IT IS CONFIRMED DIAGNOSTIC TROUBLE CODE P16F3 IS BEING INDUCED BY THE CUSTOMER'S DRIVING HABITS, CLEAR THE DIAGNOSTIC TROUBLE CODE AND REVIEW PROPER VEHICLE OPERATION WITH THE CUSTOMER TO PREVENT THE DIAGNOSTIC TROUBLE CODE FROM RESETTING. ADVISE THE CUSTOMER ENGINEERING IS AWARE OF THIS CONCERN AND IS INVESTIGATING A REPAIR.

CADILLAC, CHEVROLET, GMC · 2016-01-29

This technical bulletin provides a procedure to reprogram the transmission control module to correct a firm garage shift, start up clunk, and DTC P16F3 condition

CHEVROLET · 2015-11-06

This preliminary informational bulletin provides repair information on Engine Control Module (ECM)reprogramming to correct a customer concern of MIL illuminated, DTC P16F3 with €˜Engine Power is Reduced€™ message displayed in the DIC

CHEVROLET, GMC · 2015-11-03

This Preliminary Information communication provides information to the technician about vehicles that have the check engine lamp being illuminated. If the technician finds Diagnostic Trouble Code P16F3 with or without other codes in the Engine Control Module, technician should check to see if updated calibrations are available for the Engine Control Module.

CADILLAC, CHEVROLET, GMC · 2015-09-15

This Preliminary Information communication provides information to the technician about vehicles that may have Malfunction Indicator Lamp. Technician may find a Diagnostic Trouble Code P16F3 current or history in the Transmission Control Module. Technician should verify that the Diagnostic Trouble Code P16F3 is set in the Transmission Control Module. If the Diagnostic Trouble Code is set in the Transmission Control Module technician will need to contact General Motors Technical Assistance Center for further assistance.

CADILLAC, CHEVROLET, GMC · 2015-06-03

This Preliminary Information communication provides information to the technician about vehicles that have a Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P16F3 as a current or history code in the Transmission Control Module. Technician will need to insure that the Diagnostic Trouble Code P16F3 is set in the Transmission Control Module. If the Diagnostic Trouble Code is set in the Transmission Control Module Technician will need to contact General Motors Technical Assistance Center for further assistance.

CADILLAC, CHEVROLET, GMC · 2015-06-01

This technical bulletin provides repair information for transmission control module reprogramming to correct a customer concern for MIL illuminated with firm shifts, shudder, engine RPM flare and DTCs P0606, P16F3 or P2818 set.

CADILLAC, CHEVROLET, GMC · 2015-05-29

This Preliminary Information communication advises the technician to call General Motors Technical Assistance Center if the customer has a malfunction indicator lamp on and there is a diagnostic trouble code P16F3 set in the transmission control module.

CADILLAC, CHEVROLET, GMC · 2015-05-07

This preliminary informational bulletin provides repair information to correct a customer concern of MIL illuminated with Engine Power is Reduced message displayed after cold start. Technician may find DTC P16F3 set in history.

CADILLAC, CHEVROLET, GMC · 2015-03-23

This Preliminary Information communication provides information to the technician the steps to diagnose and repair vehicles with a Malfunction Indicator Lamp on. Technician may find Diagnostic Trouble Code P16F3. If the Diagnostic Trouble Code is set in the Transmission Control Module technician will need to contact General Motors Technical Assistance Center for further assistance.

CADILLAC, CHEVROLET, GMC · 2015-03-04

This Preliminary Information communication provides information to the technician about vehicles that may have Malfunction Indicator Lamp. Technician may find a Diagnostic Trouble Code P16F3 current or history in the Transmission Control Module. Technician should verify that the Diagnostic Trouble Code P16F3 is set in the Transmission Control Module. If the Diagnostic Trouble Code is set in the Transmission Control Module technician will need to contact General Motors Technical Assistance Center for further assistance.

CHEVROLET · 2012-11-05

12273 - Service Update. An incorrect calibration may cause the setting of DTC P16F3 and limit engine power to approximately 5 mph (8 km/h) after an engine stall. Upon the next ignition, the code will clear and engine power will be restored to normal. Dealers are to reprogram the engine control module (ECM)

CHEVROLET · 2012-11-05

12273 - SERVICE UPDATE. AN INCORRECT CALIBRATION MAY CAUSE THE SETTING OF DTC P16F3 AND LIMIT ENGINE POWER TO APPROXIMATELY 5 MPH (8 KM/H) AFTER AN ENGINE STALL. UPON THE NEXT IGNITION, THE CODE WILL CLEAR AND ENGINE POWER WILL BE RESTORED TO NORMAL. DEALERS ARE TO REPROGRAM THE ENGINE CONTROL MODULE (ECM)

CHEVROLET · 2012-11-01

Service Update for Inventory and Customer Vehicles DTC P16F3 Set and Reducedl Engine Power after Stall Expires with Base Warranty