Skip to content

Body

B10AA

Code meaning and manufacturer information

OBD-II / DTC

Reference meaning

What does this code mean?

The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Before replacing a part

Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.

Scan worksheet →

Manufacturer communications

4

Original wording in English

View all ↗

0806417 ↗

ALFA ROMEO

Audio System Warning Light Illuminated This bulletin involves checking and installing a protective cover on the amplifier. The customer may describe that the when the audio system warning light is illuminated the radio will turn on but with no audio sound.Upon further investigation the technician may find that the following Diag…

ALFA ROMEO

Flash: MIL Illumination And Transmission Over Temperature Message This bulletin involves updating the Body Control Module (BCM) software. The customer may notice a cluster message ?Transmission Over Temperature? that appears for a short time and the Malfunction Indicator Lamp (MIL) may turn on. The customer may also notice that …

08-021-15 ↗

ALFA ROMEO

Transmission Over Temperature Message This bulletin involves updating the Body Control Module (BCM) software. The customer may notice a cluster message ?Transmission Over Temperature? that appears for a short time and the Malfunction Indicator Lamp (MIL) may turn on. The customer may also notice that the Dynamic Car Control Syst…

08-051-14 ↗

FIAT

Odometer Flashing And B10AA-4A- Check Configuration Failed - Incorrect Component Installed This bulletin involves a Body Control Module (BCM) Proxi Alignment, for proper operation. The customer may notice that the Odometer is flashing. On further inspection an active DTC may be found, B10AA-4A- Check Configuration Failed - Incor…

Check vehicle applicability

3

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

View all ↗

MakeModelModel year
Alfa Romeo4C ↗2015
Alfa Romeo4C SPIDER ↗2017
Fiat500L ↗2014

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.