Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
C0049-7BBrake Fluid - Low Fluid Level
Manufacturer communications
6Original wording in English
FORD
Some 2021-2024 Bronco vehicles may exhibit an illuminated red brake warning indicator with diagnostic trouble code (DTC) C0049:01 stored in the anti-lock brake system (ABS) module. This may be due to pin fitment at the brake fluid level sensor connector. To resolve this concern, replace the brake fluid reservoir and replace the …
FORD
Some 2026 Explorer vehicles equipped with a 2.3L engine and built on 22-Dec-2025 and through 02-Feb-2026 may exhibit an illuminated anti-lock brake system (ABS) warning lamp or "Check Brake System" warning message with diagnostic trouble code (DTC) C0049:01 and/or C0049:0A stored in the ABS module. This may be due to a pin fit c…
FORD
Some 2021-2024 Bronco vehicles may exhibit an illuminated red brake warning indicator with diagnostic trouble code (DTC) C0049:01 stored in the anti-lock brake system (ABS) module. Replace the brake fluid reservoir and the brake fluid level sensor electrical connector. Do not disconnect the brake fluid level sensor electrical co…
FORD
Some 2021-2025 Bronco vehicles may exhibit an illuminated red brake warning indicator with diagnostic trouble code (DTC) C0049:01 stored in the anti-lock brake system (ABS) module. Replace the brake fluid reservoir and the brake fluid level sensor electrical connector. Do not disconnect the brake fluid level sensor electrical co…
Check vehicle applicability
9A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.