Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P06DAEngine Oil Pressure Control Circuit
Manufacturer communications
22Original wording in English
FORD
Some 2024 Ranger vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P06DA and/or P06DB stored in the powertrain control module (PCM). This may be due to a damaged oil pressure control solenoid connector C1744. Before performing normal Workshop Manual (WSM) diagnostics, perform…
DODGE, FREIGHTLINER, MERCEDES-BENZ
Complaint Fault code P06DA00 is found current or stored in engine control unit. Check engine light may be activated. Cause Various causes Remedy Up to Model year 2018: Fault code P06DA00 can be disregarded if not activating the check engine light, unless otherwise specified in the gui- ded test. The vehicle continues to operate …
INFINITI
ENGINE ROOM SUB-HARNESS IF YOU CONFIRM DTC P06DA-00 for “ENGINE OIL PRESSURE CONTROL” is stored as current (active) with CONSULT-III plus (C-III plus). ACTION Replace the engine room sub-harness. Refer to the SERVICE PROCEDURE in this bulletin. IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you …
FORD
Some 2024 Ranger vehicles may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P06DA and/or P06DB stored in the powertrain control module (PCM). This may be due to a damaged oil pressure control solenoid connector C1744. Before performing normal Workshop Manual (WSM) diagnostics, perform…
Check vehicle applicability
257A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Cadillac | CTS-V ↗ | 2018 |
| Cadillac | ESCALADE ↗ | 2020 |
| Cadillac | ESCALADE ↗ | 2018 |
| Chevrolet | CAMARO ↗ | 2020 |
| Chevrolet | CAMARO ↗ | 2018 |
| Chevrolet | CORVETTE ↗ | 2018 |
| Chevrolet | CORVETTE ↗ | 2015 |
| Chevrolet | CORVETTE ↗ | 2014 |
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.