Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0715INPUT SPEED SENSOR A
P0715-64Input/Turbine Shaft Speed Sensor "A" Circuit - signal plausibility failure
P0715INPUT SPEED SENSOR A
Manufacturer communications
26Original wording in English
FORD, LINCOLN
Some 2015-2016 vehicles equipped with 6F50/6F55 transmission and built on 2-Nov-2015 and through 1-Feb-2016 may exhibit no reverse, 3rd and 5th gear with diagnostic trouble codes (DTCs) P0715,P0717,P0756 and/or P2701. This may be caused by the direct clutch cylinder/tone wheel (7F283) inadvertently forcing the snap ring out of p…
NISSAN
“SERVICE AT POWER REDUCED” WARNING DISPLAYED AND DTC P0715 STORED IN THE TCM IF YOU CONFIRM The customer states the “Service AT Power reduced” warning message (Figure 1) is/was displayed, AND DTC P0715 (INPUT SPEED SENSOR A) is the only DTC stored in the TCM. NOTE: DTC P0715 may be stored as ‘Past’. ACTION 1. Confirm the current…
INFINITI
“SERVICE AT POWER REDUCED” WARNING DISPLAYED AND DTC P0715 STORED IN THE TCM IF YOU CONFIRM The client states the “Service AT Power reduced” warning message (Figure 1) is/was displayed, AND DTC P0715 (INPUT SPEED SENSOR A) is the only DTC stored in the TCM. NOTE: DTC P0715 may be stored as ‘Past’. ACTION 1. Confirm the current T…
TOYOTA
TSB: Some 2017 ? 2018 model year Highlander and Sienna vehicles may exhibit a whine noise while driving, a harsh shift, MIL ON, or reduced power. The following Diagnostic Trouble Codes (DTCs) may be present: P07457F, P07757F, P07957F, P28077F, P28167F, P08BA7F, P27137F, P07407E, P27567F, P211904, or P071531. For transaxles withi…
Check vehicle applicability
96A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Audi | A5 CABRIOLET ↗ | 2012 |
| Audi | A5 CABRIOLET ↗ | 2011 |
| Audi | A5 CABRIOLET ↗ | 2010 |
| Audi | RS 5 CABRIOLET ↗ | 2013 |
| Audi | RS5 ↗ | 2014 |
| Audi | RS5 ↗ | 2013 |
| Audi | S4 ↗ | 2014 |
| Audi | S4 ↗ | 2013 |
Code meaning and manufacturer information
Original wording in English · Historical directory labels; manufacturer applicability has not been established for every entry.
Input/Turbine Speed Sensor Circuit Malfunction
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.