Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P0735-00Gear 5 Shift Incorrect Ratio
P07355th gear synchronization error is detected
P0735Gear 5 Shift Incorrect Ratio
Manufacturer communications
77Original wording in English
FORD, LINCOLN
This article supersedes 26-2287. Reason for update: update the labor operation numbers to add MT to operations C, F, G, H, J, K, L and M, and correct the part number LIMZ-4A015-B to L1MZ-4A015-B. Some of the vehicles listed in the Model statement above may exhibit at least one of the following conditions: Harsh engagement Dela…
KIA
TECHNICAL SERVICE BULLETIN: SERVICE ACTION: TRANSAXLE ASSEMBLY REPLACEMENT (SA648) - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to replace the transaxle assembly on certain 2027MY Tellu…
FORD, LINCOLN
This article supersedes 25-2302. Reason for update: update the labor time allowance for F-150 vehicles, update the Parts list to replace the part number W716979-S439 with W721084-S439, and add a note for LV fluids XT-10-QLVC and CXT-10-LV6 "Transfer Case Fluid". Some of the vehicles listed in the Model statement above may exhibi…
KIA
TECHNICAL SERVICE BULLETIN: SERVICE ACTION: TRANSAXLE ASSEMBLY REPLACEMENT (SA648) - This bulletin provides information to replace the transaxle assembly on certain 2027MY Telluride Hybrid (LQ2 HEV) vehicles produced from February 02, 2026, through March 20, 2026. The affected vehicles may exhibit a rough 3rd → 4th gear upshift …
Check vehicle applicability
275A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Chevrolet | SILVERADO ↗ | 2014 |
| Chevrolet | SILVERADO ↗ | 2013 |
| Chevrolet | SILVERADO ↗ | 2012 |
| Chevrolet | SILVERADO ↗ | 2011 |
| Chevrolet | SILVERADO 2500 ↗ | 2014 |
| Ford | BRONCO ↗ | 2023 |
| Ford | BRONCO ↗ | 2022 |
| Ford | BRONCO ↗ | 2021 |
Code meaning and manufacturer information
Original wording in English · Historical directory labels; manufacturer applicability has not been established for every entry.
Gear 5 Incorrect ratio
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.