A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
P0741 ← What does this code mean?138 Results
NISSAN · 2021-09-29
DTC P0741/4/6, P0776, P0841, P0875, P0965, P2857/8/9, P17F0/1/2/4 AND/OR P285A STORED IN THE TCM, AND MAY HAVE HESITATION AND/OR REDUCED POWER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
NISSAN · 2021-06-14
DTC P0741/4/6, P0776, P0841, P0875, P0965, P2857/8/9, P17F0/1/2/4 AND/OR P285A STORED, AND MAY HAVE HESITATION AND/OR REDUCED POWER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
KIA · 2021-04-29
TECHNICAL SERVICE BULLETIN: SERVICE ACTION: IVT/CVT SW LOGIC IMPROVEMENT AND/OR IVT/CVT REPLACEMENT (SA476) - This bulletin provides the procedure to improve the software logic of the IVT (Intelligent Variable Transmission)/CVT (Continuous Variable Transmission) on some 2020MY Rio (SC) vehicles produced from July 1, 2019 through August 10, 2020 equipped with IVT/CVT, which may exhibit an MIL on with DTCs P0730, P0731, P0741, and P0867 (active, history, or pending).
NISSAN · 2021-03-19
DTC P0741/4/6, P0776, P0841, P0965, P2857/8/9, P17F0/1/2/4 AND/OR P285A STORED, AND MAY HAVE HESITATION AND/OR REDUCED POWER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
FORD, LINCOLN · 2020-11-18
Some 2020 Edge/Nautilus/Escape/Corsair/Transit Connect vehicles with and 8F35/8F40 transmission built on or before 30-Sep-2020 may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble codes (DTCs) P0741 and/or P1744 present or stored in the powertrain control module (PCM). This may be due to the torque converter and a pump stator bushing leak. Replacement of only the torque converter and/or the main control may not resolve the concern. To correct the condition, replace the following components: the torque converter, fluid pump assembly, both fluid filters, main control, input shaft, and flush the transmission cooling system.
NISSAN · 2020-08-27
DTC P0741/4/6, P0776, P0841, P0965, P2857/8/9, P17F0/1/2/4 AND/OR P285A STORED, AND MAY HAVE HESITATION AND/OR REDUCED POWER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
HYUNDAI · 2020-06-24
Certain vehicles may experience an illuminated warning light due to Diagnostic Trouble Codes (DTC). This service campaign provides information on the procedures to perform the ECU and TCU update, and, if necessary, replace the IVT (Intelligent Variable Transmission) to resolve this condition. • TCU DTC Codes: P0730, P0731, P0741, P0867, P1603 • ECU DTC Codes: P0106, P0068, P0101
HYUNDAI · 2020-06-24
Certain vehicles may experience an illuminated warning light due to Diagnostic Trouble Codes (DTC). Perform the ECU and TCU update, and, if necessary, replace the IVT (Intelligent Variable Transmission) to resolve this condition. ï‚· TCU DTC Codes: P0730, P0731, P0741, P0867, P1603 ï‚· ECU DTC Codes: P0106, P0068, P0101
FORD, LINCOLN · 2020-04-15
Some 2017-2018 F-150/Raptor, 2018 Expedition/Mustang/Navigator vehicles equipped with a 10R80 automatic transmission and built on or before 20-Nov-2017 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0741 and P1744 in the powertrain control module (PCM) or transmission control module (TCM). This may be due to a sticking torque converter clutch (TCC) valve in the main control valve body assembly. To correct the condition, follow the Service Procedure to replace the main control valve body.
NISSAN · 2020-04-13
MIL ON WITH DTC P0741, P0744, P0746, P0776, P0841, P0965, P2857, P2858, P2859, AND/OR P285A STORED, AND MAY HAVE HESITATION AND/OR REDUCED POWER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
KIA · 2020-04-08
TECHNICAL SERVICE BULLETIN: TCM MIL ON DTC P0741 LOGIC IMPROVEMENT - This bulletin provides the procedure to improve the logic of the Transmission Control Module (TCM) on some 2020MY Telluride (ON) vehicles, produced from February 6, 2019 through December 9, 2019, which may illuminate MIL DTC P0741.
NISSAN · 2019-11-14
MIL ON WITH DTC P0741, P0744, P0746, P0776, P0841, P0965, P2857, P2858, P2859, AND/OR P285A STORED, AND MAY HAVE HESITATION AND/OR LACK OF POWER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
KIA · 2019-07-03
TSB: SERVICE ACTION: 3.3L GDI 8AT TCU LOGIC IMPROVEMENT FOR DTC P0741(SA387) - This bulletin has been revised to include additional information. This bulletin provides the procedure to improve the logic of the Transmission Control Unit (TCU) software on some 2019MY Sorento (UMa) vehicles produced from January 24, 2018 through March 26, 2019, and Sedona (YP) produced from February 14, 2018 through October 15, 2018, which may experience a malfunction indicator lamp (MIL) ON with DTC P0741.
KIA · 2019-05-23
TSB: SERVICE ACTION: 3.3 GDI 8AT TCU LOGIC IMPROVEMENT FOR DTC P0741(SA387) - This bulletin provides the procedure to improve logic of the TCU (Transmission Control Unit) software on some 2019MY Sorento (UMa) 3.3L vehicles produced from January 24, 2018 to March 26, 2019, which may experience a malfunction indicator lamp (MIL) ON with DTC P0741. To correct this concern, apply the improved logic to the TCU using the KDS ECU Upgrade function as described in this bulletin.
FORD · 2019-04-11
Some 2013-2015 Escape vehicles equipped with a 1.6L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) and/or a transmission malfunction service now warning with only diagnostic trouble codes (DTCs) P0741 and/or P1744 stored in the powertrain control module (PCM). This may be due to internal damage to the torque converter. To resolve the condition, repair or replace the affected internal transmission components as directed by the Service Procedure.
FORD · 2018-06-04
Some 2017-2018 F-150/Raptor, 2018 Expedition/Mustang/Navigator vehicles equipped with a 10R80 automatic transmission and built on or before 20-Nov-2017 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0741 and P1744 in the powertrain control module (PCM) or transmission control module (TCM). This may be due to a sticking torque converter clutch (TCC) valve in the main control valve body assembly. Follow the Service Procedure steps to correct the condition.
GENESIS, HYUNDAI · 2016-10-18
"AUTOMATIC TRANSMISSION SOLENOID & SENSOR REPLACEMENT FOR DTC P0741, P0743, P0748, P0753, P0758, P075A, P0763, P0768, P0773, P2709 & P0841"
CHEVROLET, GMC · 2015-06-26
15111 - SPECIAL COVERAGE. ON SOME 2012 MODEL YEAR CHEVROLET SILVERADO, EXPRESS, COLORADO AND GMC SIERRA, SAVANA, AND CANYON VEHICLES EQUIPPED WITH A 4.3L, 2.9L, OR 3.7L ENGINE (RPO LU3, LLV, OR LLR) AND A 4L60E AUTOMATIC TRANSMISSION (RPO M30), THE MALFUNCTION INDICATOR LAMP (MIL) MAY BE ILLUMINATED AND THE TRANSMISSION MAY EXHIBIT A HARSH SHIFT FROM FIRST GEAR TO SECOND GEAR. THIS CONDITION MAY ALSO SET DIAGNOSTIC TROUBLE CODE (DTC) P0741 IN THE TRANSMISSION CONTROL MODULE (TCM). IF DTC P0741 IS FOUND, DEALERS ARE TO REPLACE THE AUTOMATIC TRANSMISSION WIRING HARNESS.
CHEVROLET, GMC · 2015-06-24
This preliminary informational bulletin provides diagnostic tips that may be helpful in correcting a customer concern of a Malfunction Indicator Lamp (MIL) illuminated. Technicians may find DTC P0741 Torque Converter Clutch Stuck Off set .
KIA · 2015-06-01
TSB: 6 SPD A/T SOLENOID REPLACEMENT – MULTIPLE DTCS - THIS BULLETIN PROVIDES INFORMATION RELATING TO THE REPLACEMENT OF VARIOUS SHIFT SOLENOIDS ON 6-SPEED AUTOMATIC TRANSAXLES WITH DTCS P0741, P0743, P0748, P0753, P0758, P0763, P0768, P0773, P1778 AND P2709. REPLACE THE SOLENOIDS IF CURRENT OR HISTORY CODES ARE PRESENT; DO NOT REPLACE THE TRANSAXLE. TO REDUCE VEHICLE REPAIR TIME, THIS PROCEDURE CAN BE PERFORMED WITH THE TRANSAXLE INSTALLED IN THE VEHICLE. REFER TO KGIS FOR SOLENOID PACK REMOVAL AND REINSTALLATION PROCEDURES FOR THE SPECIFIC YEAR AND MODEL OF THE VEHICLE.
CHEVROLET, GMC · 2015-05-13
This preliminary informational bulletin provides repair information for a customer concern of Malfunction Indicator Lamp (MIL) on, and technician finding DTC P0741: Torque Converter Clutch Stuck Off set.
CHEVROLET, GMC · 2015-03-23
This preliminary informational bulletin provides diagnostic tips for a customer concern of Malfunction Indication Lamp (MIL) illuminated, and a technician may find DTC P0741 set: Torque Converter Clutch Stuck Off
CHEVROLET, GMC · 2015-01-16
This preliminary informational bulletin provides diagnostic tips to correct a customer concern of a Malfunction Indicator Lamp (MIL) illuminated and a technician finding DTC P0741:Torque Converter Clutch Stuck Off, set.
AUDI · 2014-07-01
Supersedes Technical Service Bulletin Group 37 number 14-22 dated May 1, 2014. Transmission warning may appear in instrument cluster. After ignition cycle, the warning message is no longer present. DTC P074100 (Torque Converter Clutch Circuit Performance) or ?Stuck Off? is stored in transmission control module (TCM). The fault occurs with ATF temperature below 60o C. Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
KIA · 2014-05-22
TSB: 6 SPD A/T SOLENOID REPLACEMENT ? DTC P0741 - This bulletin provides information relating to the replacement of the Damper Clutch (D/C) Solenoid on 6-speed automatic transaxles with DTC P0741 (active or history), instead of replacing the transaxle. To reduce vehicle repair time, this procedure can be performed with the transaxle installed in the vehicle.
AUDI · 2014-05-01
Supersedes Technical Service Bulletin Group 37 number 13-01 dated April 24, 2013. Transmission warning may appear in instrument cluster. After ignition cycle, the warning message is no longer present. DTC P074100 (Torque Converter Clutch Circuit Performance) or ?Stuck Off? is stored in transmission control module (TCM), J217 (address word 03). The fault occurs with ATF temperature below 60o C. Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
FORD, LINCOLN · 2013-06-01
LINCOLN/FORD: ON CERTAIN VEHICLES, THE DIAGNOSTIC TROUBLE CODES (DTCS) P0741 AND P1744 MALFUNCTION INDICATION LAMP (MIL) WILL ILLUMINATE WITHOUT ANY OTHER SYMPTOMS PRESENT AND MAY BE CAUSED BY TORN INNER TORQUE CONVERTER SEAL. MODEL 2013 EDGE, FLEX, TAURUS, EXPLORER, MKS, MKT. *PE
AUDI · 2013-04-24
Supersedes Technical Service Bulletin Group 37 number 13-97 dated March 4, 2013. Customer may report transmission warning lamp illuminated in instrument cluster. After ignition cycle, the warning message is no longer present. DTC P074100 (Torque Converter Clutch Circuit Performance) or "Stuck Off" is stored in transmission control module (TCM), J217 (address word 03). The fault occurs with ATF temperature below 60o C. Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
AUDI · 2013-03-04
Supersedes Technical Service Bulletin Group 37 number 13-86 dated February 6, 2013. Customer may report transmission warning lamp illuminated in instrument cluster. After ignition cycle, the warning message is no longer present. DTC P074100 (Torque Converter Clutch Circuit Performance) or "Stuck Off" is stored in transmission control module, J217 (03). The fault occurs with ATF temperature below 60o C. Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
AUDI · 2013-02-06
Supersedes Technical Service Bulletin Group 37 number 13-85 dated February 4, 2013. Customer may report transmission warning lamp illuminated in instrument cluster. After ignition cycle, the warning message is no longer present. DTC P074100 "Torque Converter Clutch Circuit Performance" or "Stuck Off" is stored in TCM. The fault occurs with ATF temperature below 60o C. Check for this temp range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.