Skip to content

Powertrain

P0805

Code meaning and manufacturer information

OBD-II / DTC

Reference meaning

What does this code mean?

The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Before replacing a part

Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.

Scan worksheet →

Manufacturer wording

Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.

View all ↗

Manufacturer communications

4

Original wording in English

View all ↗

NTB21-109 ↗

NISSAN

DTC P0805 FOR CLUTCH POSITION SENSOR A STORED IN TCM IF YOU CONFIRM DTC P0805 (Clutch Position Sensor A) is stored in the TCM. NOTE: The customer may have stated: ï‚· The MIL was ON. ï‚· The Idle Stop System Fault message (Figure 1) was displayed. ï‚· They experienced a drivability concern. ACTION 1. Confirm the current TCM part…

20B23-S1 ↗

FORD

In some of the affected vehicles, customer may report erratic shifting, missed gear shifting, vibration, and check engine light illumination with one or more of the following codes P0809, P0805, P087A, P087B, P0806, P0900, or P090D, due to the clutch actuator motor failure.

20B23 ↗

FORD

Certain 2016 through 2017 Model Year Focus equipped with a DPS6 Automatic Transmission - Replacement of Clutch Actuator Motors In some of the affected vehicles, customer may report erratic shifting, missed gear shifting, vibration, and check engine light illumination with one or more of following codes P0809, P0805, P087A, P087B…

ASI-44686 ↗

FORD

FORD: SOME VEHICLES ARE EXPERIENCING, WITH OR WITHOUT POWERTRAIN DIAGOSTIC TROUBLE CODES (DTC) P0805, P06B8, P0809, P0850, P087A, P087E, P0884, P283A, P2831, P2836, P2837, P2835, AN INTERMITTENT OR DELAYED ENGAGEMENT, AUTOMATIC TRANSMISSION SHIFTING FROM PARK, DRIVE OR REVERSE, NOISE DURING START, INTERMITTENT START, NO CRANK, N…

Check vehicle applicability

5

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

View all ↗

MakeModelModel year
FordFOCUS ↗2017
FordFOCUS ↗2016
FordFOCUS ↗2013
FordFOCUS ↗2012
NissanPATHFINDER ↗2022

Code meaning and manufacturer information

Original wording in English · Historical directory labels; manufacturer applicability has not been established for every entry.

Clutch Position Sensor Circuit Malfunction

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.