Skip to content

P0805 · Manufacturer communications

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

P0805 ← What does this code mean?

4 Results

NTB21-109 ↗

NISSAN · 2021-12-06

DTC P0805 FOR CLUTCH POSITION SENSOR A STORED IN TCM IF YOU CONFIRM DTC P0805 (Clutch Position Sensor A) is stored in the TCM. NOTE: The customer may have stated: ï‚· The MIL was ON. ï‚· The Idle Stop System Fault message (Figure 1) was displayed. ï‚· They experienced a drivability concern. ACTION 1. Confirm the current TCM part number. 2. Reprogram the TCM, if applicable. NOTE: If DTC P0805 stores again, after successful reprogramming, refer to ASIST and the ESM for further diagnosis/repairs.

20B23-S1 ↗

FORD · 2020-08-18

In some of the affected vehicles, customer may report erratic shifting, missed gear shifting, vibration, and check engine light illumination with one or more of the following codes P0809, P0805, P087A, P087B, P0806, P0900, or P090D, due to the clutch actuator motor failure.

20B23 ↗

FORD · 2020-07-20

Certain 2016 through 2017 Model Year Focus equipped with a DPS6 Automatic Transmission - Replacement of Clutch Actuator Motors In some of the affected vehicles, customer may report erratic shifting, missed gear shifting, vibration, and check engine light illumination with one or more of following codes P0809, P0805, P087A, P087B, P0806, P0900 or P090D, due to the clutch actuator motor failure.

ASI-44686 ↗

FORD · 2014-08-01

FORD: SOME VEHICLES ARE EXPERIENCING, WITH OR WITHOUT POWERTRAIN DIAGOSTIC TROUBLE CODES (DTC) P0805, P06B8, P0809, P0850, P087A, P087E, P0884, P283A, P2831, P2836, P2837, P2835, AN INTERMITTENT OR DELAYED ENGAGEMENT, AUTOMATIC TRANSMISSION SHIFTING FROM PARK, DRIVE OR REVERSE, NOISE DURING START, INTERMITTENT START, NO CRANK, NO START OR HARD START. MODEL 2012-13 FOCUS. *PE