Un véhicule répertorié est une piste. Vérifiez moteur, période de production et logiciel dans les informations du constructeur.
C2703 ← Que signifie ce code ?7 Résultats
KIA · 2020-04-28
TECHNICAL SERVICE BULLETIN: SERVICE ACTION: BCW SOFTWARE UPDATE (SA422) - This bulletin provides the procedure to update the logic of the Blind Spot Collision Warning (BCW) on some 2021MY Seltos (SP2) vehicles, produced from November 20, 2019 through March 27, 2020, which may exhibit MIL ON with DTC(s) C2702 – C2703.
HYUNDAI · 2019-12-23
Some Palisade (LX2) vehicles may intermittently experience the BCW Malfunction Indicator Light ON with a message ?Check Blind-Spot Collision Warning System? displayed on the instrument cluster. When the BCW Malfunction Indicator Light is ON, the BCW function becomes inoperative. When the BCW Malfunction Indicator Message turns ON, the diagnostic code C270354 (Control Module Slave Calibration) will be triggered.
HYUNDAI · 2019-12-23
Some Palisade (LX2) vehicles may intermittently experience the BCW Malfunction Indicator Light ON with a message ?Check Blind-Spot Collision Warning System? displayed on the instrument cluster. When the BCW Malfunction Indicator Light is ON, the BCW function becomes inoperative. This bulletin provides the service procedure to update the BCW system software to correct the intermittent BCW Malfunction Indicator Light. NOTE: When the BCW Malfunction Indicator Message turns ON, the diagnostic code C270354 (Control Module Slave Calibration) will be triggered.
HYUNDAI · 2019-10-11
Certain 2019 MY Elantra (ADa) vehicles may experience the Blind-Spot Collision Warning (BCW) light displayed on the instrument cluster. In some cases one and/or two of the following DTCs can be set: ? C2702 ? Control Module Missing Calibration ? C2703 ? Control Module Slave Missing Calibration This bulletin provides the service procedure to replace the left and right Blind-Spot radar modules.
HYUNDAI · 2019-10-11
Certain 2019 MY Elantra (ADa) vehicles may experience the Blind-Spot Collision Warning (BCW) light displayed on the instrument cluster. In some cases one and/or two of the following DTCs can be set: · C2702 Control Module Missing Calibration · C2703 Control Module Slave Missing Calibration This bulletin provides the service procedure to replace the left and right Blind-Spot radar modules.
KIA · 2016-09-01
PITSTOP: RECALIBRATION OF BLIND SPOT DETECTION AFTER COLLISION REPAIRS - THIS PITSTOP PROVIDES INFORMATION RELATING TO SOME VEHICLES EQUIPPED WITH BLIND SPOT DETECTION (BSD), WHICH MAY EXHIBIT A “CHECK BSD SYSTEM” MESSAGE WITH DTCS: C270254 AND C270354: C270254: CONTROL MODULE MASTER MISSING CALIBRATION / C270354: CONTROL MODULE SLAVE MISSING CALIBRATION
KIA · 2015-04-02
TSB: SERVICE ACTION: BLIND SPOT DETECTION (BSD) SYSTEM LOGIC IMPROVEMENT (SA187) - THIS BULLETIN PROVIDES INFORMATION RELATED TO AN UPGRADE OF THE LOGIC FOR THE BLIND SPOT DETECTION (BSD) SYSTEM OF SOME 2015MY OPTIMA (QF) VEHICLES, PRODUCED FROM AUGUST 12, 2014 TO NOVEMBER 19, 2014. THE VEHICLES IN QUESTION MAY HAVE A “CHECK BSD SYSTEM” MESSAGE ILLUMINATED IN THE INSTRUMENT CLUSTER, ALONG WITH DTC C270254 OR C270354 STORED IN BSD SYSTEM, AS ACTIVE OR PENDING, DURING FAULT CODE SEARCHING. TO RESOLVE THIS CONCERN, THE BSD SYSTEM SHOULD BE REPROGRAMMED USING THE GDS DOWNLOAD, AS DESCRIBED IN THIS BULLETIN. FOR CONFIRMATION THAT THE LATEST REFLASH HAS BEEN DONE TO A VEHICLE YOU ARE WORKING ON, VERIFY ROM ID USING THE TABLES IN THIS TSB.