Un véhicule répertorié est une piste. Vérifiez moteur, période de production et logiciel dans les informations du constructeur.
P20FE ← Que signifie ce code ?8 Résultats
CHEVROLET, GMC · 2024-04-16
This service bulletin provides a service procedure to correct a customer concern of the Malfunction Indicator Lamp (MIL) Illuminated - DTC P062F, P040B, P041B, P0422, P060C, P062B, P1428, P142A, P20EE, P20FE, P22F9, P244A, and/or P244B Set.
CHEVROLET, GMC · 2023-10-30
This technical bulletin provides repair information to correct a customer concern of Vehicles Setting DTCs P20EE, P22FE, P2C7A, P2EAD, P20FE, P2203, P22FB, P2459, P049D, P0300, and/or P1C30.
AUDI · 2019-03-13
This bulletin contains repair instructions for when a MIL is on and DTC P20E900 or P20FE00 is stored in the ECM.
AUDI · 2018-07-31
This bulletin contains repair instructions for when a MIL is on and DTC P20E900 or P20FE00 is stored in the ECM.
AUDI · 2018-07-30
This bulletin contains repair instructions for when a MIL is on and DTC P20E900 or P20FE00 is stored in the ECM.
PORSCHE · 2015-07-27
Concerns: DME control unit Information: This is to inform you of a voluntary Workshop Campaign on the above-mentioned vehicles. On the affected vehicles with Selective Catalytic Reduction (SCR), there is a possibility that the fault memory entry P20FE00 "Reducing agentmetering unit malfunction" will be entered in the DME control unit faultmemory and the Check Engine light will be activated because the diagnostic setup of the SCR system is too sensitive in the low-temperature range, although the AdBlue®metering quantity is still set correctly in this temperature range.
VOLKSWAGEN · 2015-03-27
Tech Tips ((3.0L TDI ? CNRB) ? MIL on - P20FE00 Fault): If during diagnosis for MIL on there is a P20FE00 fault present, follow the procedure below to prevent unnecessary replacement of parts.
AUDI · 2014-07-15
The MIL is on. DTC P20FE00 (Reductant Metering Unit Performance) is stored in the engine control module (ECM). The ECM software version is older than the specified software for this bulletin. If ECM software is current or newer than below, this bulletin cannot be applied. Follow GFF instructions. Software improvement with more robust onboard diagnostics.