P246C · Communications du constructeur

FORD · 2021-03-02

Some 2017-2021 F-Super Duty vehicles equipped with a 6.7L diesel may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2459, P246C and/or P2463 with a Drive to Clean maintenance message. Vehicles operated primarily in a stationary or off-highway low speed use may exhibit frequent exhaust regeneration attempts. In these conditions, a vehicle may not easily allow for normal exhaust regeneration and may benefit from operator commanded regeneration (OCR) capability so it can perform complete exhaust regeneration in a stationary setting.

FORD · 2019-03-04

Some 2015-2019 Transit vehicles equipped with a 3.2L diesel engine may exhibit Drive To Clean maintenance messages and/or an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2459, P2463, and/or P246C. Vehicles may also exhibit frequent automatic exhaust regeneration attempts. This may be due to vehicles being used in stationary or off-highway, low speed applications. If automatic regeneration attempts are unsuccessful, these symptoms may be a result of soot accumulation in the diesel particulate filter (DPF). These vehicles may benefit from operator commanded regeneration (OCR) capability so complete regeneration cycles may be performed in a stationary setting. Some 2015-2019 Transit vehicles equipped with a 3.2L diesel engine may exhibit Drive To Clean…

FORD · 2018-08-31

Some 2016-2017 F-650/F-750 vehicles equipped with a 6.7L diesel engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P246C and/or P2463. Performing a diesel particulate filter (DPF) manual regeneration using the appropriate Ford scan tool will fail resulting in a loss of communication error. Follow the Service Procedure steps to correct the condition.

FORD · 2018-08-02

Some 2017-2019 F-Super Duty vehicles equipped with a 6.7L diesel may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2459, P246C and/or P2463 with a "Drive to Clean" maintenance message. Vehicles operated primarily in a stationary or off-highway low speed use may exhibit frequent exhaust regeneration attempts. In these conditions a vehicle may not easily allow for normal exhaust regeneration and may benefit from operator commanded regeneration (OCR) capability so it can perform complete regeneration in a stationary setting. Information only, follow the Service Procedure steps to correct the condition.

FORD · 2018-07-24

Some 2015-2018 Transit vehicles equipped with a 3.2L diesel engine may exhibit "Drive To Clean" maintenance messages and/or an illuminated malfunction indicator lamp (MIL) on with DTC P2459, P2463, and/or P246C. Vehicles may also exhibit frequent automatic exhaust regeneration attempts. This may be due to vehicles being used in a stationary or off-highway, low speed applications. If automatic regeneration attempts are unsuccessful, these symptoms may be a result of soot accumulation in the diesel particulate filter (DPF). These vehicles may benefit from operator commanded regeneration (OCR) capability so complete regeneration cycles may be performed in a stationary setting. Information only, follow the Service Procedure steps to correct the condition.

FORD · 2018-07-09

When performing diagnostics for DTCs P2201, P2452, P2459, P246C and/or P2463, a manual regeneration and diesel particulate filter (DPF) parameter reset using the appropriate scan tool may need to be performed. To perform the manual regeneration, go to the Toolbox tab > Powertrain > Service Functions > Diesel Particulate Regeneration System > DPF Manual Regeneration. The scan tool may indicate that a regeneration of the DPF is not recommended at this time, selecting YES on this screen will allow the regeneration process to complete. To perform the DPF parameter reset, go to the Toolbox tab > Powertrain > Service Functions > Diesel Particulate Regeneration System > DPF Parameter Reset.

FORD · 2018-07-06

This article supersedes TSB 18-2005 to update the title and Service Procedure. Some 2017 F-Super Duty vehicles equipped with a 6.7L engine and built on or before 7-Nov-2017 may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P2201, P246C and/or P2463. Follow the Service Procedure steps to correct the condition.

FORD · 2018-07-03

Some 2015-2018 Transit vehicles equipped with a 3.2L diesel engine may exhibit "Drive To Clean" maintenance messages and/or an illuminated malfunction indicator lamp (MIL) on with DTC P2459, P2463, and/or P246C. Vehicles may also exhibit frequent automatic exhaust regeneration attempts. This may be due to vehicles being used in a stationary or off-highway, low speed applications. If automatic regeneration attempts are unsuccessful, these symptoms may be a result of soot accumulation in the diesel particulate filter (DPF). These vehicles may benefit from operator commanded regeneration (OCR) capability so complete regeneration cycles may be performed in a stationary setting. Follow the Service Procedure steps to correct the condition.

FORD · 2018-02-22

Some 2016-2018 Transit vehicles equipped with a 3.2L engine and built on or before 13-Feb-2018 may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P246C and/or P2463 in the powertrain control module (PCM). Follow the Service Procedure steps to correct the condition.

FORD · 2018-01-09

Some 2017 F-Super Duty vehicles equipped with a 6.7L engine and built on or before 7-Nov-2017 may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P20EE, P2459, P2201, P246C and/or P2463. Follow the Service Procedure steps to correct the condition.

FORD · 2017-11-14

Some 2015-2016 F-Super Duty pickup vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with DTCs P2201, P2459, P2463 and/or P246C. Reprogram the powertrain control module (PCM) to the latest calibration using Integrated Diagnostic System (IDS) or Ford J2534 Diagnostic Software (FJDS) release 106.01 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com.

FORD · 2017-07-11

Some 2017 F-Super Duty vehicles equipped with a 6.7L engine and built on or before 12-May-2017 may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P20EE, P2459, P2201, P246C and/or P2463. Follow the Service Procedure steps to correct the condition.

FORD · 2017-02-27

SOME 2015-2016 F-SUPER DUTY PICKUP VEHICLES EQUIPPED WITH A 6.7L ENGINE MAY EXHIBIT AN ILLUMINATED MALFUNCTION INDICATOR LAMP (MIL) WITH DTCS P2002, P2201, P2459, P2463 AND/OR P246C. REPROGRAM THE POWERTRAIN CONTROL MODULE (PCM) TO THE LATEST CALIBRATION USING IDS RELEASE 104.02 OR HIGHER. MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODULE PROGRAMMING TO OBTAIN THE LATEST UPDATES. CALIBRATION FILES MAY ALSO BE OBTAINED AT WWW.MOTORCRAFTSERVICE.COM.

FORD · 2017-02-23

SOME 2017 F-SUPER DUTY VEHICLES EQUIPPED WITH A 6.7L ENGINE AND BUILT ON OR BEFORE 20-FEB-2017 MAY EXHIBIT AN ILLUMINATED MIL WITH DIAGNOSTIC TROUBLE CODES (DTCS) P20EE, P2002, P2201, P246C AND/OR P2463. REPROGRAM THE POWERTRAIN CONTROL MODULE (PCM) TO THE LATEST CALIBRATION USING IDS RELEASE 104.02 OR HIGHER. MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODULE PROGRAMMING TO OBTAIN THE LATEST UPDATES. CALIBRATION FILES MAY ALSO BE OBTAINED AT WWW.MOTORCRAFTSERVICE.COM.

FORD · 2015-09-09

6.7L Diesel - Malfunction Indicator Lamp (Mil) Illuminated - Diagnostic Ttouble Codes (DTCS) P2002, P246C And/Or P2463- Built On Or Before 09/09/2015

FORD · 2015-03-26

6.7L Diesel - Malfunction Indicator Lamp (Mil) Illuminated - Diagnostic Ttouble Codes (DTCS) P2002, P246C And/Or P2463- Built On Or Before 03/26/2015.

FORD · 2012-06-12

FORD: SOME TRUCKS, EQUIPPED WITH 6.4L DIESEL ENGINE WILL LACK POWER WITH DIAGNOSTIC TROUBLE CODES (DTCS) P246C AND P2463 WITH A MALFUNCTION INDICATOR LAMP. *PE