P2507 · Communications du constructeur

MAZDA · 2024-10-11

Some customer may experience any of the following: Multiple Warning Lights On • Infotainment center display blank • Engine no start unless the key transmitter is placed near the start button • Interior lights do not illuminate • DTC P2507:00 - PCM, PCM POWER SYSTEM: (LOW INPUT) stored. • DTC U0156:00 - PCM, CAN communication system, Communication error with CMU (Connectivity Master Unit). • This may be caused by Fuse F1 not fully seated (poor terminal tension) or a poor ground connection at the front harness connector G03.

MAZDA · 2024-09-12

Some customer may experience any of the following: Multiple Warning Lights On • Infotainment center display blank • Engine no start unless the key transmitter is placed near the start button • Interior lights do not illuminate • DTC P2507:00 - PCM, PCM POWER SYSTEM: (LOW INPUT) stored. • DTC U0156:00 - PCM, CAN communication system, Communication error with CMU (Connectivity Master Unit).

MAZDA · 2023-09-11

Some customers may experience any of the following: Multiple Warning Lights On Infotainment center display blank Engine no start unless the key transmitter is placed near the start button. Interior lights do not illuminate. DTC P2507:00 - PCM, PCM POWER SYSTEM: (LOW INPUT) stored. DTC U0156:00 - PCM, CAN communication system, Communication error with CMU (Connectivity Master Unit). This may be caused by Fuse F1 not fully seated or poor terminal tension.

MAZDA · 2021-01-26

Some vehicles may experience the CHECK ENGINE LIGHT ON with DTC P2610 and P2507 stored in memory after engine start and room fuse 15A (A) removed. P2610:00: Instrument cluster internal engine off timer performance problem. P2507:00: PCM battery voltage low input

MAZDA · 2020-01-23

Some vehicles may experience the CHECK ENGINE LIGHT ON with DTC P2610 and P2507 stored in memory after engine start and room fuse 15A (A) removed.à ̄‚· P2610:00: Instrument cluster internal engine off timer performance problem à ̄‚· P2507:00: PCM battery voltage low input. As a past malfunction, the customer will not notice it (no warning light illuminated), but the DTC may be found during a vehicle service. P2507 in this situation is only applicable on 2016 and later models. This is caused by the engine being started 3 or more times after a short duration of engine off (less than 15 seconds) with the room fused removed. NOTE: The odometer will display “F0-002” during transport mode (room fuse 15A removed). Transport mode is canceled when room fuse 15A is installed or the vehicle…

MAZDA · 2019-01-04

Some vehicles may experience the CHECK ENGINE LIGHT ON with DTC P2610 and P2507 stored inmemory after engine start and room fuse 15A (A) removed. P2610:00: Instrument cluster internal engine off timer performance problem P2507:00: PCM battery voltage low input As a past malfunction, the customer will not notice it (no warning light illuminated), but the DTC may be found during a vehicle service. P2507 in this situation is only applicable on 2016 and later models. This is caused by the engine being started 3 or more times after a short duration of engine off (less than 15 seconds) with the room fused removed. NOTE: The odometer will display "F0-002" during transport mode (room fuse 15A removed). Transport mode is canceled when room fuse 15A is installed or the vehicle odometer is more than…

MAZDA · 2018-05-08

Some vehicles may experience the CHECK ENGINE LIGHT ON with DTC P2610 and P2507 stored inmemory after engine start and room fuse 15A (A) removed. P2610:00: Instrument cluster internal engine off timer performance problem P2507:00: PCM battery voltage low input. As a past malfunction, the customer will not notice it (no warning light illuminated), but the DTC may be found during a vehicle service. P2507 in this situation is only applicable on 2016 and later models. This is caused by the engine being started 3 or more times after a short duration of engine off (less than 15 seconds) with the room fused removed. NOTE: The odometer will display "F0-002" during transport mode (room fuse 15A removed). Transport mode is canceled when room fuse 15A is installed or the vehicle odometer is more…

MAZDA · 2017-12-18

Some vehicles may experience the CHECK ENGINE LIGHT OIN with DTC P2610 and P2507 stored in memory after engine start and room fuse 15A removed * P2610 Instrument cluster internal engine off timer performance problem * P2507 PCM battery voltage low input.

MAZDA · 2015-08-06

SOME VEHICLES MAY EXPERIENCE THE CHECK ENGINE LIGHT ON WITH DTC P2610 AND P2507 STORED IN MEMORY AFTER ENGINE START AND ROOM FUSE 15A (A) REMOVED. • P2610:00: INSTRUMENT CLUSTER INTERNAL ENGINE OFF TIMER PERFORMANCE PROBLEM • P2507:00: PCM BATTERY VOLTAGE LOW INPUT AS A PAST MALFUNCTION, THE CUSTOMER WILL NOT NOTICE IT (NO WARNING LIGHT ILLUMINATED), BUT THE DTC MAY BE FOUND DURING A VEHICLE SERVICE. P2507 IN THIS SITUATION IS ONLY APPLICABLE ON 2016 AND LATER MODELS. THIS IS CAUSED BY THE ENGINE BEING STARTED 3 OR MORE TIMES AFTER A SHORT DURATION OF ENGINE OFF (LESS THAN 15 SECONDS) WITH THE ROOM FUSED REMOVED.